To save time, the inspector should develop his own plan or sequence for checking miscellaneous electrical items, many of which can be inspected while inspecting other items.
Procedures: | Reject Vehicle If: |
Inspect Electrical System. | |
(1) Horn shall be securely fastened, produce audible but not harsh or loud sound, and have a horn button readily accessible to the operator. | (1) Horn is: (a) Loose; (b) Fails to function; (c) Produces loud or harsh sound; (d) Not equipped with horn button within arm's reach of operator. |
(2) Switches shall all function properly. | (2) Switches fail to function. |
(3) Wiring shall be well insulated. | (3) Wiring: (a) Insulation is bare, cracked, or broken; (b) Shows evidence of burning or short-circuiting. |
(4) Connections shall be tight and secure. | (4) Connections are loose or show signs of excessive corrosion. |
(5) Automatic Transmission Only. Neutral safety starting switch-Determine that starter operates with gear selector in P and N only. | (5) Starter operates with gear selector in any gear other than P or N. |
(6) Battery-Check General Condition. | (6) Battery: (a) Is cracked or broken; (b) Connections are loose or show signs of excessive corrosion; (c) Is not held down securely; (d) Vents are not open (if equipped); (e) Is low on fluid level (if applicable). |
Md. Code Regs. 11.14.02.11