40 C.F.R. § 467.36

Current through October 31, 2024
Section 467.36 - Pretreatment standards for new sources
(a) Except as provided in 40 CFR 403.7 , any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources.
(b) There shall be no discharge allowance for wastewater pollutants from the degassing operation.
(c) The mass of wastewater pollutants from the core and ancillary operations except those identified in paragraph (b) introduced into a POTW shall not exceed the values set forth below:

Subpart C

Core

Pollutant or pollutant propertyPSNS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of extruded
Chromium0.130.05
Cyanide0.070.03
Zinc0.350.15
TTO0.24
Oil and grease (alternate monitoring parameter)3.403.40

Subpart C

Extrusion Press Leakage

Pollutant or pollutant propertyPSNS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of hard alloy aluminum extruded
Chromium0.110.05
Cyanide0.060.03
Zinc0.310.13
TTO0.21
Oil and grease (alternate monitoring parameter)2.982.98

Subpart C

Direct Chill Casting Contact Cooling Water

Pollutant or pollutant propertyPSNS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum cast
Chromium0.490.20
Cyanide0.270.11
Zinc1.360.56
TTO0.92
Oil and grease (alternate monitoring parameter)13.2913.29

Subpart C

Press Heat Treatment Contact Cooling Water

Pollutant or pollutant propertyPSNS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum quenched
Chromium0.760.31
Cyanide0.410.17
Zinc2.080.86
TTO1.41
Oil and grease (alternate monitoring parameter)20.3720.37

Subpart C

Solution Heat Treatment Contact Cooling Water

Pollutant or pollutant propertyPSNS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million-off-lbs) of aluminum quenched
Chromium0.760.31
Cyanide0.410.17
Zinc2.080.86
TTO1.41
Oil and grease (alternate monitoring parameter)20.3720.37

Subpart C

Cleaning or Etching Bath

Pollutant or pollutant propertyPSNS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million-off-lbs) of aluminum cleaned or etched
Chromium0.0670.027
Cyanide0.0360.015
Zinc0.1830.075
TTO0.124
Oil and grease (alternate monitoring parameter)1.791.79

Subpart C

Cleaning or Etching Rinse

Pollutant or pollutant propertyPSNS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million-off-lbs) of aluminum cleaned or etched
Chromium0.520.21
Cyanide0.280.11
Zinc1.420.59
TTO0.96
Oil and grease (alternate monitoring parameter)13.9113.91

Subpart C

Cleaning or Etching Scrubber Liquor

Pollutant or pollutant propertyPSNS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million-off-lbs) of aluminum cleaned or etched
Chromium0.720.29
Cyanide0.390.16
Zinc1.970.81
TTO1.34
Oil and grease (alternate monitoring parameter)19.3319.33

40 C.F.R. §467.36

48 FR 49149, Oct. 24, 1983; 49 FR 11632, 11633, 11634, Mar. 27, 1984