Wash. Rev. Code § 82.08.962

Current through the 2024 Regular Session
Section 82.08.962 - [Expires 1/1/2030] Exemptions-Sales of machinery and equipment used in generating electricity
(1)
(a) Subject to the requirements of this section, the tax imposed by RCW 82.08.020 does not apply to sales of machinery and equipment used directly in generating electricity using fuel cells, wind, sun, biomass energy, tidal or wave energy, geothermal resources, or technology that converts otherwise lost energy from exhaust, as the principal source of power, or to sales of or charges made for labor and services rendered in respect to installing such machinery and equipment, but only if the purchaser develops with such machinery, equipment, and labor a facility capable of generating not less than one thousand watts AC of electricity. Except as otherwise provided in this section, the purchaser must pay the state and local sales tax on such sales and apply to the department for a remittance of the tax paid.
(b) Beginning on July 1, 2011, through December 31, 2019, the amount of the exemption under this subsection (1)(b) is equal to seventy-five percent of the state and local sales tax paid. The purchaser is eligible for an exemption under this subsection (1)(b) in the form of a remittance.
(c) Beginning January 1, 2020, through December 31, 2029, the purchaser is entitled to an exemption, in the form of a remittance, under this subsection (1)(c) in an amount equal to:
(i) Fifty percent of the state and local sales tax paid, if:
(A) The exempt purchase is for machinery and equipment or labor and services rendered in respect to installing such machinery and equipment in (a) of this subsection, excluding qualified purchases under subsection (c)(i)(B) of this subsection, and the department of labor and industries certifies that the project includes: Procurement from and contracts with women, minority, or veteran-owned businesses; procurement from and contracts with entities that have a history of complying with federal and state wage and hour laws and regulations; apprenticeship utilization; and preferred entry for workers living in the area where the project is being constructed. In the event that a project is built without one or more of these standards, and a project developer or its designated principal contractor demonstrates that it has made all good faith efforts to meet the standards but was unable to comply due to lack of availability of qualified businesses or local hires, the department of labor and industries may certify that the developer complied with that standard; or
(B) The exempt purchase is for machinery and equipment that is used directly in the generation of electricity by a solar energy system capable of generating more than one hundred kilowatts AC but no more than five hundred kilowatts AC of electricity, and labor and services rendered in respect to installing such machinery and equipment, and the department of labor and industries certifies that the project has met the requirements of (c)(i)(A) of this subsection, and the purchaser provides the following documentation to the department as part of the application for a remittance:
(I) A copy of the contractor's certificate of registration in compliance with chapter 18.27 RCW;
(II) The contractor's current state unified business identifier number;
(III) A copy of the contractor's proof of industrial insurance coverage for the contractor's employees working in Washington as required in Title 51 RCW; employment security department number as required in Title 50 RCW; and a state excise tax registration number as required in Title 82 RCW; and
(IV) Documentation of the contractor's history of compliance with federal and state wage and hour laws and regulations, consistent with (e)(ii)(D) of this subsection;
(ii) Seventy-five percent of the state and local sales tax paid, if the department of labor and industries certifies that the project complies with (c)(i)(A) and (B) of this subsection and compensates workers at prevailing wage rates determined by local collective bargaining as determined by the department of labor and industries. This subsection (1)(c)(ii) does not apply with respect to solar energy systems described in (c)(i)(B) of this subsection; or
(iii) One hundred percent of the state and local sales tax paid, if the department of labor and industries certifies that the project is developed under a community workforce agreement or project labor agreement. This subsection (1)(c)(iii) does not apply with respect to solar energy systems described in (c)(i)(B) of this subsection.
(d) In order to qualify for the remittance under (c) of this subsection, installation of the qualifying machinery and equipment must commence no earlier than January 1, 2020, and be completed by December 31, 2029.
(e) Beginning July 1, 2019, and through December 31, 2029, the purchaser is entitled to an exemption under this subsection (1)(e) in an amount equal to one hundred percent of the state and local sales tax due on:
(i) Machinery and equipment that is used directly in the generation of electricity by a solar energy system that is capable of generating no more than one hundred kilowatts AC of electricity; or
(ii) Labor and services rendered in respect to installing machinery and equipment exempt under (e)(i) of this subsection, and the seller meets the following requirements at the time of the sale for which the exemption is claimed:
(A) Has obtained a certificate of registration in compliance with chapter 18.27 RCW;
(B) Has obtained a current state unified business identifier number;
(C) Possesses proof of industrial insurance coverage for the contractor's employees working in Washington as required in Title 51 RCW; employment security department number as required in Title 50 RCW; and a state excise tax registration number as required in Title 82 RCW; and
(D) Has had no findings of violation of federal or state wage and hour laws and regulations in a final and binding order by an administrative agency or court of competent jurisdiction in the past twenty-four months.
(f) Purchasers claiming an exemption under (e) of this subsection must provide the seller with an exemption certificate in a form and manner prescribed by the department.
(g) In order to qualify for the exemption under (e)(ii) of this subsection, installation of the qualifying machinery and equipment must commence no earlier than July 1, 2019, and be completed by December 31, 2029.
(2)
(a) The department of labor and industries must adopt emergency and permanent rules to:
(i) Define and set minimum requirements for all labor standards identified in subsection (1)(c) of this section; and
(ii) Set requirements for all good faith efforts under subsection (1)(c)(i) and (ii) of this section, as well as documentation requirements and a certification process. Requirements for all good faith efforts must be designed to maximize the likelihood that the project is completed with said standards and could include: Proactive outreach to firms that are women, minority, and veteran-owned businesses; advertising in local community publications and publications appropriate to identified firms; participating in community job fairs, conferences, and trade shows; and other measures. The certification process and timeline must be designed to prevent undue delay to project development.
(b) Emergency rules must be adopted by December 1, 2019, and take effect January 1, 2020.
(3) For purposes of this section and RCW 82.12.962, the following definitions apply:
(a) "Biomass energy" includes:
(i) By-products of pulping and wood manufacturing process;
(ii) animal waste;
(iii) solid organic fuels from wood;
(iv) forest or field residues;
(v) wooden demolition or construction debris;
(vi) food waste;
(vii) liquors derived from algae and other sources;
(viii) dedicated energy crops;
(ix) biosolids; and
(x) yard waste. "Biomass energy" does not include wood pieces that have been treated with chemical preservatives such as creosote, pentachlorophenol, or copper-chrome-arsenic; wood from old growth forests; or municipal solid waste.
(b) "Fuel cell" means an electrochemical reaction that generates electricity by combining atoms of hydrogen and oxygen in the presence of a catalyst.
(c)
(i) "Machinery and equipment" means fixtures, devices, and support facilities that are integral and necessary to the generation of electricity using fuel cells, wind, sun, biomass energy, tidal or wave energy, geothermal resources, or technology that converts otherwise lost energy from exhaust.
(ii) "Machinery and equipment" does not include:
(A) Hand-powered tools;
(B) property with a useful life of less than one year;
(C) repair parts required to restore machinery and equipment to normal working order;
(D) replacement parts that do not increase productivity, improve efficiency, or extend the useful life of machinery and equipment;
(E) buildings; or
(F) building fixtures that are not integral and necessary to the generation of electricity that are permanently affixed to and become a physical part of a building.
(d) "Project labor agreement" and "community workforce agreement" means a prehire collective bargaining agreement with one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S.C. Sec. 158(f).
(4)
(a) Machinery and equipment is "used directly" in generating electricity by wind energy, solar energy, biomass energy, tidal or wave energy, geothermal resources, or technology that converts otherwise lost energy from exhaust if it provides any part of the process that captures the energy of the wind, sun, biomass energy, tidal or wave energy, geothermal resources, or technology that converts otherwise lost energy from exhaust, converts that energy to electricity, and stores, transforms, or transmits that electricity for entry into or operation in parallel with electric transmission and distribution systems.
(b) Machinery and equipment is "used directly" in generating electricity by fuel cells if it provides any part of the process that captures the energy of the fuel, converts that energy to electricity, and stores, transforms, or transmits that electricity for entry into or operation in parallel with electric transmission and distribution systems.
(5)
(a)
(i) A purchaser claiming an exemption in the form of a remittance under subsection (1)(b) or (c) of this section must pay the tax imposed by RCW 82.08.020 and all applicable local sales taxes imposed under the authority of chapters 82.14 and 81.104 RCW. The purchaser may then apply to the department for remittance in a form and manner prescribed by the department. A purchaser may not apply for a remittance under this section more frequently than once per quarter. The purchaser must specify the amount of exempted tax claimed and the qualifying purchases for which the exemption is claimed. The purchaser must retain, in adequate detail, records to enable the department to determine whether the purchaser is entitled to an exemption under this section, including: Invoices; proof of tax paid; and documents describing the machinery and equipment.
(ii) The application for remittance must include a copy of the certificate issued for the project by the department of labor and industries as prescribed by rule under subsection (2) of this section.
(b) The department must determine eligibility under this section based on the information provided by the purchaser, which is subject to audit verification by the department. The department must on a quarterly basis remit exempted amounts to qualifying purchasers who submitted applications during the previous quarter.
(6)
(a) Except as otherwise provided in (c) of this subsection, from October 1, 2017, through December 31, 2019, the exemption provided by this section does not apply to:
(i) Machinery and equipment that is used directly in the generation of electricity using solar energy and capable of generating no more than five hundred kilowatts AC of electricity; or
(ii) sales of or charges made for labor and services rendered in respect to installing such machinery and equipment.
(b) The exemption provided by this section is reinstated for machinery and equipment for solar energy systems capable of generating more than one hundred kilowatts AC but no more than five hundred kilowatts AC of electricity, or sales of or charges made for labor and services rendered in respect to installing such machinery and equipment, if installation of the machinery and equipment commences on or after January 1, 2020.
(c) The exemption provided by this section is reinstated for machinery and equipment for solar energy systems capable of generating no more than one hundred kilowatts AC of electricity, or sales of or charges made for labor and services rendered in respect to installing such machinery and equipment, if installation of the machinery and equipment commences on or after July 1, 2019.
(7) This section expires January 1, 2030.

RCW 82.08.962

Amended by 2019 c 288,§ 18, eff. 5/7/2019.
Amended by 2018 c 164,§ 5, eff. 7/1/2018.
Amended by 2017SP3 c 36,§ 14, eff. 7/7/2017.
Amended by 2013SP2 c 13,§ 1502, eff. 7/1/2013.
2009 c 469 § 101.

Tax preference performance statement- 2019 c 288 s s 18 and 19: "This section is the tax preference performance statement for the tax preferences contained in sections 18 and 19, chapter 288, Laws of 2019. This performance statement is only intended to be used for subsequent evaluation of the tax preference. It is not intended to create a private right of action by any party or be used to determine eligibility for preferential tax treatment.

(1) The legislature categorizes this tax preference as one intended to induce certain designated behavior by taxpayers, as indicated in RCW 82.32.808(2)(a).

(2) It is the legislature's specific public policy objective to reduce the amount of carbon dioxide emissions in Washington. It is the legislature's intent to extend the expiration date of and expand the existing sales and use tax exemption for machinery and equipment used directly in generating certain types of alternative energy, in order to reduce the price charged to customers for that machinery and equipment, thereby inducing some customers to buy machinery and equipment for alternative energy when they might not otherwise, thereby displacing electricity from fossil-fueled generating resources, thereby reducing the amount of carbon dioxide emissions in Washington. It is also the intent of the legislature to maximize cost savings associated with clean energy construction for Washington electric customers by encouraging development of these resources in time for projects to benefit from both this incentive and expiring federal incentives.

(3) It is also the legislature's specific public policy objective to provide an incentive for more of the projects that meet the objectives of subsection (2) of this section to be constructed with high labor standards, including family level wages and providing benefits including health care and pensions, as well as maximizing access to economic benefits from such projects for local workers and diverse businesses.

(4) The joint legislative audit and review committee is not required to perform a tax preference review under chapter 43.136 RCW for the tax preferences contained in sections 18 and 19, chapter 288, Laws of 2019 and it is the intent of the legislature to allow the tax preferences to expire upon their scheduled expiration dates." [2019 c 288 s 17.]

Findings-Intent-Effective date- 2019 c 288 : See RCW 19.405.010 and 19.405.901.

Effective date- 2018 c 164 : See note following RCW 82.08.900.

Findings-Intent-Effective date-2017 3rd sp.s. c 36: See notes following RCW 82.16.130.

Intent-2013 2nd sp.s. c 13: "It is the intent of the legislature to help promote energy independence in the state of Washington and to better position Washington to attract a vibrant clean energy technology manufacturing sector to the state. The purpose of the tax preference created in part XV of this act is to incentivize electricity generation from renewable energy sources, reducing the costs of transitioning to these sources and technologies by exempting machinery, equipment, and labor and service charges associated with such electricity generation from the retail sales and use tax. This tax preference makes the most of the local renewable resources, protects us from the price volatility of certain fossil fuel sources, and helps the state achieve its greenhouse gas emissions targets. In addition, promoting manufacture and installation of facilities capable of generating power from renewable sources can create economic benefits in both rural and urban counties, creating high quality jobs and developing a skilled workforce in an industry sector in which significant job growth is anticipated over the coming decades." [ 2013 2nd sp.s. c 13 s 1501.]

Effective date-2013 2nd sp.s. c 13: See note following RCW 82.08.956.

Effective date- 2009 c 469 : "Except for sections 801 and 802 of this act, this act is necessary for the immediate preservation of the public peace, health, or safety, or support of the state government and its existing public institutions, and takes effect July 1, 2009." [2009 c 469 s 902.]