Section 12-120-417 - Architect's seal - rules(1) Upon receiving a license from the board, an architect may obtain a crimp type seal, a rubber stamp type seal, or an electronic type seal in a design approved by the board. The seal must contain the architect's name and license number and the designation "Colorado licensed architect". Architects licensed before July 1, 2013, may continue to use their existing seals.(2) An architect shall use the architect's seal and signature and the date of signature only when the work to which the seal is applied was prepared under the architect's responsible control.(3) The board shall adopt rules governing use of the seal and the retention, use, and distribution of sealed documents and copies thereof.Amended by 2024 Ch. 342,§ 26, eff. 8/7/2024.Renumbered from C.R.S. § 12-25-317 and amended by 2019 Ch. 136, § 1, eff. 10/1/2019.Amended by 2013 Ch. 356, § 34, eff. 7/1/2013.L. 2006: Entire part added with relocated provisions, p. 760, § 15, effective July 1. L. 2013: Entire section R&RE, (SB 13-161), ch. 356, p. 2092, § 34, effective July 1.This section is similar to former § 12-25-317 as it existed prior to 2019.
2024 Ch. 342, was passed without a safety clause. See Colo. Const. art. V, § 1(3).