Section SPS 220.08 - Lamp replacement(1) A tanning facility shall post a sign in each area where a tanning device is used which states the date at which tubes, bulbs or lamps in that tanning device were replaced. The tanning facility shall maintain a record of the dates on which the tubes, bulbs, or lamps were replaced.(2) The tubes, bulbs, or lamps shall be replaced at the frequency recommended by the manufacturer or when the tubes, bulbs, or lamps become damaged or defective. A replacement lamp for a tanning unit shall be compatible with the original lamp as specified by the manufacturer of the unit or shall be substantially equivalent to the manufacturer's original lamp type. In this subsection, "substantially equivalent" means within 10% of the UV-B emission of the original lamp and meeting the performance requirements of the U.S. food and drug administration in 21 CFR 1040.20(c) (1).(3) A facility may only use tubes, bulbs or lamps which meet the standards of the U.S. food and drug administration in 21 CFR 1040.20. This applies to original or replacement tubes, bulbs or lamps.(4) The facility shall maintain the device manufacturer's literature indicating the rating, output, or intensity of the tube, lamp or bulb required for replacement.(5) No tube, bulb, or lamp designated for medical use only may be used.Wis. Admin. Code Department of Safety and Professional Services SPS 220.08
Renumbered from DHS 161.08, Cr. Register, June, 1993, No. 450, eff. 7-1-93.