Wash. Admin. Code § 173-350-220

Current through Register Vol. 24-21, November 1, 2024

Section 173-350-220 - Composting facilities

(1)Composting facilities - Applicability.

(a) These standards apply to all facilities that treat solid waste by composting.

(b) These standards do not apply to:

(i) Methods of managing organic materials that are excluded from the solid waste handling standards in WAC 173-350-020;

(ii) Composting used as a treatment for contaminated soil or contaminated dredged material regulated under WAC 173-350-320 or 173-350-490;

(iii) Anaerobic digesters regulated under WAC 173-350-250, or treatment of other liquid or solid wastes in digesters regulated under WAC 173-350-330;

(iv) Composting of bovine and equine carcasses for producers subject to RCW 70.95.306. Producers that fail to meet the conditions of RCW 70.95.306 will be required to obtain a solid waste handling permit from the jurisdictional health department and must comply with all other conditions of this chapter; and

(v) Composting biosolids when managed under chapter 173-308 WAC, Biosolids management.

(2)Composting facilities - Permit exemptions. In accordance with RCW 70.95.305, conditionally exempt facilities composting materials and volumes in Table 220-A must meet the conditions listed in Table 220-A, and (a) through (e) of this subsection to be conditionally exempt from solid waste handling permitting. Feedstocks not listed in Table 220-A must be approved by the department and jurisdictional health department. For the purposes of this subsection, "material on-site at any one time" includes feedstocks, active composting, curing piles, and composted materials. An owner or operator that does not comply with the terms and conditions of Table 220-A and (a) of this subsection is required to obtain a permit from the jurisdictional health department and must comply with all other applicable requirements of this chapter. Violations of the terms and conditions of Table 220-A and (a) of this subsection may be subject to the enforcement provisions of RCW 70.95.315.

Table 220-A

Terms and Conditions for Solid Waste Permit Exemptions

	Organic Materials	Volume	Specific Requirements for Activity or Operation
(1)	All organic feedstocks	No more than 5,000 gallons or 25 cubic yards of material on-site at any one time.	No notification, reporting or testing requirements.
(2)	All organic feedstocks	Greater than 25 but no more than 250 cubic yards of material on-site at any one time, not to exceed 1,000 cubic yards in a calendar year.	(a) Thirty days prior to operation, facilities must submit a notification of intent to operate as a conditionally exempt facility to the jurisdictional health department and the department. Notice of intent must be submitted on a form provided by the department; (b) Facilities that distribute composted material off-site must meet the following conditions: (i) Manage the operation to reduce pathogens to meet limits set by Table 220-B; (ii) Conduct compost analysis according to the requirements of Table 220-B. Compost testing frequency is based on volume of compost produced annually as required by subsection (4)(a)(x)(B) of this section; and (iii) Submit annual reports and results of composted material analysis to the department and the jurisdictional health department by April 1st of each calendar year. Annual reports must be submitted on forms provided by the department.
(3)	Yard debris Crop residues Manure and bedding Bulking agents	Greater than 25 but no more than 500 cubic yards of material on-site at any one time, not to exceed 2,500 cubic yards processed in a calendar year.	(a) Thirty days prior to operation, facilities must submit a notification of intent to operate as a conditionally exempt facility to the jurisdictional health department and the department. Notice of intent must be submitted on a form provided by the department. (b) Facilities that distribute composted materials off-site must meet the following conditions: (i) Manage the operation to reduce pathogens to meet limits set by Table 220-B; (ii) Conduct compost analysis according to the requirements of Table 220-B. Compost testing frequency is based on volume of compost produced annually as required by subsection (4)(a)(x)(B) of this section; and (iii) Submit annual reports and results of composted material analysis to the department and the jurisdictional health department by April 1st of each calendar year. Annual reports must be submitted on forms provided by the department.
(4)	Agricultural wastes Yard debris Bulking agents	Greater than 25 but no more than 1,000 cubic yards of agricultural wastes and bulking agents on-farm at any one time, and up to 50% of organic materials on-farm can be yard debris.	Agricultural farms managing more than 25 cubic yards of imported yard debris on-site at any one time or composting only agricultural wastes but that distribute off-site must meet the following conditions: (a) Thirty days prior to operation, facilities must submit a notification of intent to operate as a conditionally exempt facility to the jurisdictional health department and the department. Notification must be submitted on a form provided by the department; (b) If agricultural farm is only managing agricultural waste and not distributing composted material off farm, then notification in (4)(a) of this table is not required; (c) Facilities that distribute composted material off-site must meet the following conditions: (i) Manage operation to reduce pathogens to meet limits set by Table 220-B of this section; (ii) Conduct compost analysis according to the requirements of Table 220-B. Compost testing frequency is based on volume of compost produced annually as required by subsection (4)(a)(x)(B) of this section; and (iii) Submit annual reports and results of composted material analysis to the department and the jurisdictional health department by April 1st of each calendar year. Annual reports must be submitted on forms provided by the department.
(5)	Agricultural wastes Manure and bedding from zoos Bulking agents	Greater than 25 cubic yards with no upper limits when only agricultural wastes, manure and bedding from zoos, and bulking agents are processed on-farm, or on-site for zoos.	Agricultural farms that distribute composted material off-farm, or off-site for zoos, must meet the following conditions: (a) Thirty days prior to operation, facilities must submit a notification of intent to operate as a conditionally exempt facility to the jurisdictional health department and the department. Notification must be submitted on a form provided by the department; (b) For composting at a dairy, composting must occur as part of an updated dairy nutrient management plan as required by chapter 90.64 RCW, Dairy Nutrient Management Act; (c) For composting at a farm other than a dairy, composting must occur as part of an updated farm management plan written in conjunction with a conservation district, a qualified engineer, or other agricultural professional able to certify that the plan meets applicable conservation practice standards in the USDA Washington Field Office Technical Guide, Code 317, produced by the Natural Resources Conservation Service; (d) Facilities that distribute composted material off-site must meet the following conditions: (i) Manage the operation to reduce pathogens to meet limits set by Table 220-B of this section; (ii) Conduct compost analysis according to the requirements of Table 220-B. Compost testing frequency is based on volume of compost produced annually as required by subsection (4)(a)(x)(B) of this section; and (iii) Submit annual reports and results of composted material analysis to the department and the jurisdictional health department by April 1st of each calendar year. Annual reports must be submitted on forms provided by the department.

(a) Comply with the performance standards of WAC 173-350-040;

(b) Manage the operation to prevent the migration of agricultural pests identified by local horticultural pest and disease control boards, as applicable;

(c) Control nuisance odors to prevent migration beyond property boundaries;

(d) Manage the operation to prevent attraction of flies, rodents, and other vectors; and

(e) Allow the department or the jurisdictional health department to inspect the site at reasonable times.

(3)Composting facilities - Permit requirements - Location. There are no specific location standards for composting facilities subject to this chapter; however, composting facilities must meet the performance standards of WAC 173-350-040.

Note:

When considering compost facility location, please review the U.S. Department of Transportation Federal Aviation Advisory Circular. No. 150/5200-33B 2007.

(4)Composting facilities - Permit requirements - Design. Composting facilities must be designed and constructed to meet the requirements of this subsection.

(a) Composting facilities must be designed and constructed such that:

(i) The facility can be operated to meet the performance standards of WAC 173-350-040; and

(ii) The facility can be operated to promote controlled, aerobic decomposition. This requirement is intended to ensure that compost facility designers take into account porosity, nutrient balance, pile oxygen, pile moisture, pile temperature, and retention time of composting when designing a facility. It is not intended to mandate forced aeration or any other specific composting technology.

(b) The owner or operator of a composting facility must prepare and provide to the jurisdictional health department engineering reports, engineering plans, and engineering specifications that address the design standards of this subsection. The engineering documents must be prepared by a professional engineer registered in the state of Washington, and must include:

(i) An engineering report that presents the design basis and calculations for the engineered features of the facility including, but not limited to: Pad, impoundments, stormwater management features, leachate management features, and aeration and emission control features as required by the permitting air authority where applicable. The engineering report must demonstrate that the proposed design will meet the performance standards of this chapter;

(ii) Scale drawings of the facility including the location and size of feedstock and composted material storage areas, compost processing areas, fixed equipment, buildings, storm-water management features where applicable, access roads, traffic patterns, and other constructed areas and buildings integral to facility operation;

(iii) Design specifications for the engineered features of the facility including, but not limited to, pads, stormwater management features, leachate management features, and aeration and emission management features as required by a permitting air authority where applicable; and

(iv) A construction quality assurance plan that describes monitoring, testing, and documentation procedures that will be performed during construction of the facility to ensure the facility is constructed in accordance with the approved design.

(c) When operations require public access, all-weather roads must be provided from the highway or roads to and within the compost facility and must be designed and maintained to prevent traffic congestion, traffic hazards, dust, and noise pollution.

(d) Compost facilities must manage stormwater and leachate to meet the standards of this section and of any and all federal, state, and local water and air quality permits.

(e) Composting facilities must minimize the production of leachate and runoff by designing stormwater management features such as run-on prevention systems, which may include covered areas (roofs), diversion swales, ditches, or other features designed to divert stormwater from areas of feedstock preparation, active composting, and curing.

(i) Composting facilities must manage any leachate generated at the facility by providing leachate management features. The leachate management features include, but are not limited to, leachate collection, conveyance, and storage structures, or treatment systems. Leachate must be collected from areas of feedstock storage and preparation, active composting, and curing, and be conveyed to a leachate storage structure or treatment system. Any discharges to ground that result in contaminants migrating to groundwater require a waste discharge permit under chapter 90.48 RCW, Water pollution control, prior to discharge. Discharges to ground that result in degradation of groundwater quality are prohibited under chapter 90.48 RCW, Water pollution control. Any discharge to sanitary sewer requires additional permitting by the local delegated authority or department;

(ii) Stormwater and leachate collection and conveyance structures must be designed based on the volume of water resulting from a twenty-five-year storm event;

(iii) Leachate storage structures such as ponds or tanks must be of adequate capacity to store the normal maximum volume of leachate generated by the facility. The normal maximum volume will be established based on the following conditions:

(A) Facility design;

(B) Normal climatic precipitation and evaporation data for the location of the facility;

(C) Monthly leachate reuse or removal; and

(D) A factor of safety to accommodate variability of actual conditions from normal conditions.

(iv) Leachate holding ponds and tanks must be designed according to the following:

(A) Leachate ponds at registered dairies must meet Natural Resources Conservation Service standards for a waste storage facility in the 2001 (revised June 2011) Washington Field Office Technical Guide (Code 313).

(B) Leachate ponds at composting facilities other than registered dairies must be designed to meet the following requirements:

(I) Have a liner consisting of a minimum 30-mil thickness geomembrane on a subgrade that provides sufficient bearing capacity to support the liner and the contents of the pond. A liner constructed with a high density polyethylene geomembrane must be at least 60-mil thick to allow for proper welding. The jurisdictional health department may approve the use of an alternative liner design if the owner or operator can demonstrate during the permitting process that the proposed design will prevent migration of solid waste constituents or leachate into the ground or surface waters at least as effectively as the liners described in this subsection;

(II) Have dikes and slopes designed to maintain their structural integrity under conditions of a leaking liner and capable of withstanding erosion from wave action, overfilling, or precipitation;

(III) Have freeboard (distance between the liquid level and the top of the pond) equal to or greater than eighteen inches to avoid overtopping from wave action, overfilling, or precipitation. The jurisdictional health department may reduce the freeboard requirement if other engineering controls are in place that prevent overtopping. These engineering controls must be specified during the permitting process; and

(IV) Leachate ponds that have the potential to impound more than ten-acre feet (three million two hundred fifty-nine thousand gallons) of liquid measured from the top of the dike and which would be released by a failure of the containment dike must be reviewed and approved by the dam safety section of the department.

(C) Tanks used to store leachate must meet design standards in WAC 173-350-330(4)(b).

(f) Incoming feedstocks, active composting, and curing materials must be placed on pads that prevent contamination of soil or groundwater underlying or adjacent to the pads. Pads must meet the following requirements:

(i) All pads must be curbed or graded in a manner to prevent ponding, to control run-on and runoff, and to separately collect and convey all stormwater and leachate to separate storage or holding systems. Stormwater that is combined with leachate must be managed as leachate in accordance with this section;

(ii) All pads must be constructed on subgrades that provide sufficient bearing capacity to support the weight of the pad, the materials placed on them, and the equipment used in handling the materials;

(iii) The entire surface area of the pad must be designed to maintain its structural and hydraulic integrity against loads resulting from any machinery used for feedstock and compost handling activities, and from surface wear or damage caused by feedstock and compost handling, or by active composting at the facility;

(iv) The pad may be constructed of materials such as concrete (with sealed joints), asphaltic concrete, or soil cement that prevents subsurface soil and groundwater contamination; and

(v) The jurisdictional health department may allow pads for compost facilities to be designed and constructed with materials other than those listed in (f)(iv) of this subsection, provided the applicant demonstrates in the engineering report to the jurisdictional health department's and the department's satisfaction that the alternative pad provides sufficient protection to meet the performance standards of this section and of WAC 173-350-040.

(5)Composting facilities -Permit requirements - Documentation. Within thirty days of completing construction, the owner or operator of a composting facility must provide copies of the construction record drawings for engineered features at the facility and a report documenting facility construction, including the results of observations and testing carried out as part of the construction quality assurance plan, to the jurisdictional health department and the department. Facilities must not begin operating until the jurisdictional health department has determined that the construction was completed in accordance with the approved engineering report, plans, and specifications and has approved the construction documentation in writing. The jurisdictional health department has thirty days after receiving complete construction records to provide its determination.

(6)Composting facilities - Permit requirements - Operating. The owner or operator of a composting facility must:

(a) Operate the facility to:

(i) Control air contaminants such as dust and nuisance odors to prevent other contaminants from migrating beyond property boundaries in accordance with WAC 173-350-040(3);

(ii) Prevent the attraction of vectors;

(iii) Prevent the migration of agricultural pests identified by local pest and disease control boards, as applicable;

(iv) Ensure access to the facility is restricted when the facility is closed;

(v) Ensure that only feedstocks identified in the approved plan of operation are accepted at the facility;

(vi) Ensure the facility operates under the supervision and control of a properly trained individual(s) during all hours of operation:

(A) Facility supervisors responsible for daily operation must receive training, or be able to document prior training, in the basics of composting within the first year of supervising the facility. Training must consist of classroom and hands-on course work and conclude with a certificate of completion that must be kept on-site at all times. Appropriate compost training can be obtained through organizations such as the Washington organic recycling council, the Solid Waste Association of North America, the U.S. Composting Council, or other training as approved by the jurisdictional health department; and

(B) Ensure facility employees are trained in appropriate facility operations, maintenance procedures, and safety and emergency procedures according to individual job duties and according to an approved plan of operation. A trained supervisor may provide appropriate training to employees responsible for daily operations.

(vii) Implement and document pathogen reduction activities. Documentation must include compost pile temperatures representative of the composting materials, and notation of turnings as appropriate, based on the composting method used. Pathogen reduction activities must at a minimum include the following:

(A) In vessel composting - The temperature of the active compost pile must be maintained at fifty-five degrees Celsius (one hundred thirty-one degrees Fahrenheit) or higher for three consecutive days (seventy-two hours); or

(B) Aerated static pile must have a cover such as a synthetic material or a layer of finished compost to ensure that pathogen reduction temperatures are reached and vectors are controlled. The temperature of the active compost pile must be maintained at fifty-five degrees Celsius (one hundred thirty-one degrees Fahrenheit) or higher for three consecutive days (seventy-two hours); or

(C) Windrow composting - The temperature of the active compost pile must be maintained at fifty-five degrees Celsius (one hundred thirty-one degrees Fahrenheit) or higher for fifteen days or longer. During the period when the compost is maintained at fifty-five degrees Celsius (one hundred thirty-one degrees Fahrenheit) or higher, there must be a minimum of five turnings of the windrow; or

(D) An alternative method of composting that can be demonstrated by the owner or operator to achieve an equivalent reduction of human pathogens.

(viii) Monitor the composting process according to the plan of operation submitted during the permitting process. Monitoring must include inspection of incoming loads of feedstocks and pathogen reduction requirements of (a)(vii) of this subsection;

(ix) Collect composted material samples for analysis that are representative of the pile. Use a sampling method such as described in the U.S. Composting Council 2002 Test Methods for the Examination of Composting and Compost, Method 02.01-A through E; and

(x) Analyze composted material for metals and other testing parameters listed in Table 220-B.

(A) The jurisdictional health department may require additional tests for metals and contaminants;

(B) Testing frequency is based on amount of composted material produced. A representative sample of composted material must be tested for every 5,000 cubic yards produced, or every three hundred sixty-five days, whichever is more frequent. The jurisdictional health department may modify the frequency of testing based on historical data for a particular facility;

(C) Composted material meeting the conditions of subsection (6)(a)(x) and (g) of this section can be stored off of a pad.

Table 220-B

Testing Parameters

Metals and other testing parameters	Limit (mg/kg dry weight), unless otherwise specified
Arsenic	[LESS THAN EQUALS TO] 20 ppm
Cadmium	[LESS THAN EQUALS TO] 10 ppm
Copper	[LESS THAN EQUALS TO] 750 ppm
Lead	[LESS THAN EQUALS TO] 150 ppm
Mercury	[LESS THAN EQUALS TO] 8 ppm
Molybdenum	[LESS THAN EQUALS TO] 9 ppm
Nickel	[LESS THAN EQUALS TO] 210 ppm
Selenium	[LESS THAN EQUALS TO] 18 ppm
Zinc	[LESS THAN EQUALS TO] 1400 ppm
Physical contaminants1	[LESS THAN EQUALS TO] 1 percent by weight total, not to exceed .25 percent film plastic by weight
Sharps	0
pH	5 - 10 (range)
Biological stability2	Moderately unstable to very stable
Fecal coliform3	< 1,000 Most Probable Number per gram of total solids (dry weight)
OR
Salmonella	< 3 Most Probable Number per 4 grams of total solids (dry weight)

1A label or information sheet must be provided with compost that exceeds .1 percent by weight of film plastic. See WAC 173-350-220(6)(f)(iii)(D)(I).

2Tests for biological stability must be done as outlined in the United States Composting Council Test Methods for the Examination of Composting and Compost unless otherwise approved by the jurisdictional health department.

3Test for either fecal coliform or salmonella.

Note:

Biosolids composters regulated under this chapter must communicate with the jurisdictional health department to determine if different testing parameters and testing frequencies are required.

(b) Inspect the facility to prevent malfunctions and deterioration, operator errors and discharges that may cause or lead to the release of waste to the environment or a threat to human health. Inspections must be conducted at least weekly, unless an alternate schedule is approved by the jurisdictional health department as part of the permitting process.

(c) For compost facilities with leachate holding ponds, conduct regular liner inspections at least once every five years, unless an alternate schedule is approved by the jurisdictional health department as part of the permitting process. The frequency of inspections must be specified in the operations plan and must be based on the type of liner, expected service life of the material, and the site-specific service conditions:

(i) Inspect the liner for degradation and ruptures of the liner material and for failure of any seams or joints in the liner material. If the maximum wetted extent of the liner geomem-brane cannot be directly inspected visually, then the liner must be tested for leaks by electrical leak detection survey methods. If leaks, degradation, or ruptures of the liner material are detected, the liner must be repaired; and

(ii) The jurisdictional health department must be given sufficient notice and have the opportunity to be present during liner inspections. An inspection record must be kept at the facility or other convenient location if permanent office facilities are not on-site, for at least five years from the date of inspection. Inspection records must be available to the jurisdictional health department upon request.

(d) Maintain operating records of the following:

(i) Daily temperatures representative of compost piles;

(ii) Additional process monitoring data as prescribed in the plan of operation;

(iii) Results of analyses for composted materials as required in (a)(x) of this subsection and Table 220-B; and

(iv) Facility inspection reports must be maintained in the operating record. Significant deviations from the plan of operation must be noted in the operating record. Records must be kept for a minimum of five years and must be available upon request by the jurisdictional health department.

(e) Prepare and submit an annual report to the jurisdictional health department and the department by April 1st of each calendar year on forms provided by the department. The annual report must detail the facility's activities during the previous calendar year and must include the following information:

(i) Name and address of the facility;

(ii) Calendar year covered by the report;

(iii) Annual quantity and type of feedstocks received and compost produced, in cubic yards or tons;

(iv) Annual quantity of composted material sold or distributed, in cubic yards or tons;

(v) Annual summary of laboratory analysis of composted material; and

(vi) Any additional information required by the jurisdictional health department as a condition of the permit.

(f) Develop, keep, and follow a plan of operation approved as part of the permitting process. The plan of operation must convey to site personnel the concept of operation intended by the designer. The plan of operation must be kept on-site and be available for inspection at the request of the jurisdictional health department. If necessary, the plan must be modified with the approval, or at the direction of the jurisdictional health department. Each plan of operation must include the following:

(i) List of feedstocks to be composted, including a general description of the source of feedstocks. Feedstocks must be approved by the department or jurisdictional health department;

(ii) A plan to control air contaminants such as dust and nuisance odors to prevent contaminants from migrating beyond property boundaries in accordance with WAC 173-350-040(3), including:

(A) A description of how staff will document and respond to nuisance odor complaints should they arise. The plan must include date and time of complaints, weather conditions, and operations at the facility at the time of the complaint, and a summary of actions taken;

(B) A description of facility and operational features to prevent nuisance odors beyond the facility's property boundary, as determined by the jurisdictional health department, the department, or the air authority. The description must address the receiving, composting, curing, and storage areas of the facility;

(C) A description of facility maintenance activities that encompass nuisance odor prevention and control, such as acquiring critical odor control backup equipment in the event of a breakdown, a schedule for purging aeration lines and changing biofilter media as appropriate, and a schedule for cleaning leachate ponds or leachate storage tanks as appropriate; and

(D) A description of how feedstocks with high moisture or the potential for high odors will be managed to reduce nuisance odors upon receipt, and through the composting process.

(iii) A description of how wastes and organic materials including incoming feedstocks, composting, curing, and composted materials are to be handled on-site during the facility's active life, including:

(A) Maximum site capacity in cubic yards for all materials on-site at any one time. The jurisdictional health department may require cumulative capacity for materials or separate capacities for incoming feedstocks, composting, curing, and composted materials, or any combination;

(B) Processing capacity in tons or cubic yards of solid waste feedstocks processed in a given amount of time. The jurisdictional health department may require monthly or annual processing capacity;

(C) Procedures and criteria for ensuring that only the feedstocks described will be accepted. This includes a plan for rejecting feedstocks contaminated with greater than five percent physical contaminants by volume, or a plan to accept and separate contaminated loads from noncontaminated loads, and reduce physical contaminants to an acceptable level prior to composting;

(D) Procedure to reduce physical contaminants in composted material to meet testing parameters in Table 220-B. Grinding to reduce the size of physical contaminants does not meet the requirements of this section;

(I) Compost facilities must provide a label or information sheet to purchasers of compost that exceeds .1 percent film plastic by weight but does not exceed .25 percent film plastic by weight. The label or information sheet must include the statement in subsection (4)(f)(iii)(D)(II) of this section, or equivalent language approved by jurisdictional health department or the department.

(II) "This compost does not meet Department of Ecology standards for film plastic content for unrestricted use. This compost may only be used in locations where a means of removing or containing the film plastic on-site is put in place promptly after use. Acceptable controls include removal from the site, incorporation, planting, covering with soil or another media, or containment in a compost sock or similar device. This product may not be used adjacent to regulated waters of the state (e.g., wetlands, streams, lakes) or in environmentally sensitive areas."

(E) Procedures for handling unacceptable wastes;

(F) A discussion on types and amounts of feedstocks including basic calculations showing that the facility will be able to achieve an acceptable mix of materials for efficient decomposition;

(G) Material flow plan describing general procedures to manage all materials on-site from incoming feedstock to composted material;

(H) A description of equipment, including equipment to add water to compost as necessary;

(I) Compost process monitoring plan, including compost mix (carbon to nitrogen ratio), temperature, moisture, and porosity;

(J) Pathogen reduction plan;

(K) Representative sampling and analysis plan for the composted material such as described in the 2002 U.S. Composting Council Test Methods for the Examination of Composting and Compost Method 02.01-A through E;

(L) Leachate management plan, including monthly precipitation and evaporation data, and if applicable, monthly leachate reuse or removal; and

(M) Stormwater management plan.

(iv) A description of how equipment, structures, and other systems are to be inspected and maintained, including the frequency of inspections and inspection logs;

(v) A description of how facility staff will receive appropriate training in the operation of the facility, including how they will be trained to identify nuisance odors and how to correct them;

(vi) A community relations plan describing how the owner or operator will document and manage complaints;

(vii) Safety, fire, and emergency plans;

(viii) Forms for recordkeeping of daily volumes or weights of incoming feedstocks by type, outgoing composted material, and process monitoring results; and

(ix) Other details to demonstrate that the facility will be operated in accordance with this subsection and as required by the jurisdictional health department.

(g) Manage composted material piles that have met the testing parameters in Table 220-B in the following manner:

(i) Comply with the performance standards of WAC 173-350-040;

(ii) Minimize and control runoff from composted material piles through the use of covers, diversion swales, berms, ditches, or other features designed to prevent runoff and divert stormwater from compost material; and

(iii) Minimize odor by maintaining porosity of composted material piles and managing moisture levels in composted material piles, not to exceed sixty percent moisture.

(7)Composting facilities - Permit requirements - Groundwater monitoring. There are no specific groundwater monitoring requirements for composting facilities subject to this chapter; however, composting facilities must meet the performance standards of WAC 173-350-040.

(8)Composting facilities - Permit requirements - Closure. The owner or operator of a composting facility must:

(a) Notify the jurisdictional health department sixty days in advance of closure. At closure, the facility owner or operator is financially responsible for the removal of all solid waste, including but not limited to, raw or partially composted feedstocks, composted material and leachate from the facility. The materials must be sent to another facility that complies with the applicable regulations for handling the waste; and

(b) Develop, keep, and follow a closure plan approved by the jurisdictional health department as part of the permitting process. At a minimum, the closure plan must include methods of removing solid waste, leachate, and other organic materials from the facility. For planning purposes, assume that the facility is at full, permitted site capacity at the time of closure.

(9)Composting facilities - Permit requirements - Financial assurance. There are no specific financial assurance requirements for composting facilities subject to this chapter; however, composting facilities must meet the performance standards of WAC 173-350-040.

(10) Composting facilities - Permit application contents. The owner or operator of a composting facility must obtain a solid waste permit from the jurisdictional health department. All applications for permits must be submitted in accordance with the procedures established in WAC 173-350-710. In addition to the requirements of WAC 173-350-710 and 173-350-715, each application for a permit must contain:

(a) Engineering reports, plans, and specifications that address the design standards of subsections (4) and (5) of this section;

(b) A plan of operation meeting the requirements of subsection (6) of this section; and

(c) A closure plan meeting the requirements of subsection (8) of this section.

(11)Composting facilities - Designation of composted materials. When used on-site or distributed off-site, composted materials meeting the testing parameters of Table 220-B are no longer subject to this chapter. Composted materials that do not meet these requirements are solid waste and subject to management under chapter 70.95 RCW, Solid waste management- Reduction and recycling.

Wash. Admin. Code § 173-350-220

Amended by WSR 18-17-008, Filed 8/1/2018, effective 9/1/2018

Statutory Authority: RCW 70.95.020(3), 70.95.060(1), 70.95.260(6), 70.95.305, 70.95.330. 13-08-016 (Order 10-06), § 173-350-220, filed 3/25/13, effective 4/25/13. Statutory Authority: Chapter 70.95 RCW. 03-03-043 (Order 99-24), § 173-350-220, filed 1/10/03, effective 2/10/03.