Utah Admin. Code 655-11-12A
Current through Bulletin No. 2024-21, November 1, 2024
During the course of constructing, enlarging, repairing, or removing a dam, the State Engineer may make periodic inspections to determine compliance with plans and specifications, as well as to observe field conditions to see if actual conditions are consistent with those used during design. Any problems observed will be pointed out to the resident inspector or engineer for correction or change. All significant problems noted will be outlined in a letter to the owner and the owner's engineer. The engineer must respond in writing to the State Engineer as to what steps were undertaken to correct the problems.
Utah Admin. Code R655-11-12A