67 Pa. Code § 175.33

Current through Register Vol. 54, No. 45, November 9, 2024
Section 175.33 - Motorcycle inspection stations
(a)Eligibility. This designation shall be issued to stations that inspect only motorcycles.
(b)General requirements. A motorcycle inspection station shall meet the requirements of this chapter, unless specifically exempted.
(c)Certified inspection mechanic. A motorcycle inspection station shall have a mechanic certified to inspect motorcycles present during normal business hours.
(d)Record sheets. A motorcycle inspection shall be recorded on Form MV-480.
(e)Tools. In addition to the tool requirements of § 175.26 (relating to tools and equipment), a motorcycle station shall have the following additional tools:
(1) A spoke wrench.
(2) A truing stand.
(3) A photo-electric type aimer or approved headlight aiming screen.
(f)Exemption. A motorcycle station is not required to have floor jacks or a floor stand.

67 Pa. Code § 175.33

The provisions of this §175.33 adopted December 2, 1977, effective 2/1/1978, 7 Pa.B. 3499; amended July 9, 1982, effective 7/10/1982, 12 Pa.B. 2181; readopted December 2, 1988, effective 12/3/1988, 18 Pa.B. 5362; amended October 25, 2013, effective 10/26/2013, 43 Pa.B. 6349.

The provisons of this §175.33 amended under the Vehicle Code, 75 Pa.C.S. §§ 4103, 4301, 4501, 4521 and 6103.