Or. Admin. Code § 918-500-0570

Current through Register Vol. 63, No. 10, October 1, 2024

Section 918-500-0570 - Insignias and Labels

(1) No person may remove, destroy, alter, or cover an insignia of compliance except as permitted by these rules. Insignias may be removed by the division or a municipality when a manufactured dwelling bearing an insignia is found to be in violation of ORS 446.155, the Manufactured Dwelling Installation Specialty Code, these rules, or is determined to be a dangerous structure. When the division or a municipality removes an insignia, it must provide the owner or occupant with an inspection report listing the violations.

(2) An insignia may be removed and reinstalled by the homeowner or contractor when a manufactured dwelling is being re-sided.

(3) HUD certification labels or state insignias of compliance are not required to be removed from a manufactured dwelling as a result of alterations, as long as the alterations conform to the requirements of these rules and, when required, have been permitted, inspected, and approved by the division or a municipality.

(4) Manufactured dwellings damaged beyond repair as a result of flood, fire, earthquake, mishap in transit, or any other reason must have the insignias of compliance removed and returned to the division.

Or. Admin. Code § 918-500-0570

BCD 1-2010, f. 3-1-10, cert. ef. 4-1-10

Publications: Publications referenced are available from the agency.

Stat. Auth.: ORS 446.160

Stats. Implemented: ORS 446.155, 446.170, 446.245, & 446.253