19A N.C. Admin. Code 3D.0535

Current through Register Vol. 39, No. 9, November 1, 2024

Section 03D .0535 - STEERING MECHANISM

(a) The inspection mechanic must raise the vehicle to check the steering mechanism.

(b) The steering mechanism shall not be approved if:

(1) with front wheels in straight ahead position there is more than three inches of free play in steering wheels up to 18 inches in diameter or more than four inches of free play in steering wheels over 18 inches in diameter. If the vehicle is equipped with power steering, the engine must be operating;

(2) either front or rear springs are sagging or broken;

(3) the front wheels or front end assembly is loose, bent, or twisted; or bolts, nuts, or rivets are loose or missing;

(4) power steering system shows visible leaks or the power steering belt is loose or worn;

(5) vehicle frame or component of the steering mechanism is rusted to the point of mechanical failure; or

(6) shock or strut is leaking to the point of failure that will inhibit the steering of the vehicle.

19A N.C. Admin. Code 03D .0535

Authority G.S. 20-2; 20-39; 20-183.3(a)(4);
Eff. October 1, 1994;
Readopted Eff. October 1, 2021.

Authority G.S. 20-2; 20-39; 20-183.3(4);
Eff. October 1, 1994.

Readopted by North Carolina Register Volume 36, Issue 09, November 1, 2021 effective 10/1/2021.