Current through Register Vol. 46, No. 41, October 9, 2024
Section 93.6 - Form of applicationThe following shall be included in the application addressed to the commission:
(a) name and address of applicant;(b) name and address of manufacturer;(c) manufacturer's type of designation, together with a brief description of general and physical characteristics, including ratings, size, shape, adjustments and the type service to which the meter may be applied;(d) statement of intent of sponsoring entity to use, if approved;(e) a statement by the manufacturer or sponsoring entity certifying that the device under consideration has been tested to, and meets, all the requirements of this Part;(f) a statement by the manufacturer, sponsoring entity or testing laboratory, certifying that: (1) all tests have been conducted by personnel who have thorough practical and theoretical knowledge of the meters and adequate training in making precision measurements;(2) the test equipment employed in these tests conforms to the applicable requirements specified in Standards and Standardizing Equipment, of the latest version of ANSI C12; and(3) the accuracy of the test equipment has been established by comparison with standards whose accuracy is traceable to the National Institute of Standards and Technology.N.Y. Comp. Codes R. & Regs. Tit. 16 § 93.6