N.J. Admin. Code § 7:18-2.22

Current through Register Vol. 56, No. 21, November 4, 2024

Section 7:18-2.22 - Required use of DSAMs

(a) In analyzing a regulatory sample, a certified environmental laboratory shall use only:

1. A DSAM from an applicable category for which the laboratory is certified; or

2. An ATP approved by the Department for the laboratory and, if applicable, for the facility in question.

(b) The requirements of (a) above do not apply to an analysis for which all of the requirements of (b)1 through 3 below are satisfied:

1. The client has provided a written statement confirming that the analysis will not be used for regulatory purposes;

2. The laboratory's report of the results of the analysis prominently displays the following statement: "This analysis is not to be used for the purpose of determining compliance with the Safe Drinking Water Act, the Water Pollution Control Act, the portion of the Radiation Protection Act governing radon and radon progeny, the Solid Waste Management Act, the Industrial Site Recovery Act, or the Spill Compensation and Control Act; any regulation or order issued pursuant to any of those statutes; or the USEPA's CERCLA Contract Laboratory Program."; and

3. The laboratory meets the requirements of 7:18-2.15(d)3.

N.J. Admin. Code § 7:18-2.22