Minn. R. agency 167, ch. 7080, pt. 7080.1980

Current through Register Vol. 49, No. 15, October 7, 2024

Part 7080.1980 - TANK CONSTRUCTION

A. All precast reinforced concrete sewage tanks must be constructed to meet the requirements of this chapter. Information on best practices for tank construction is found in the National Precast Concrete Association's best practices manual, Precast Concrete On-site Wastewater Tanks (2005). This manual is incorporated by reference, is available through the Minitex interlibrary loan system, and is not subject to frequent change. If a conflict exists between the manual and this chapter, this chapter applies.

B. All fiberglass-reinforced polyester and polyethylene tanks must be constructed to meet the requirements of this chapter. Information on best practices for these tanks is found in the International Association of Plumbing and Mechanical Officials (IAPMO), Material and Property Standard for Prefabricated Septic Tanks, Standard PS 1-2006 (2006). This standard is incorporated by reference, is available through the Minitex interlibrary loan system, and is not subject to frequent change. If conflicts exist between the standard and this chapter, this chapter applies.

32 SR 1347

Statutory Authority: MS s 115.03; 115.55