Minn. R. agency 151, ch. 5200, PREVAILING WAGE DETERMINATIONS, pt. 5200.1100

Current through Register Vol. 49, No. 19, November 4, 2024
Part 5200.1100 - MASTER JOB CLASSIFICATIONS
Subpart 1.Requirement.
A. For purposes of parts 5200.1000 to 5200.1120, contractors must use the following codes and classifications in documenting classes of labor.
B. Descriptions of the nature of work, typical duties, and typical tools used for each code and classification of labor in subparts 2 and 5 are described in parts 5200.1101 and 5200.1102, respectively. A worker classified by a code under subpart 2 or 5 must be classified by the code and classification that best matches the worker's nature of work, typical duties, and typical tools used.
Subp. 2.Laborers.

Code No.Position Title
101Laborer, common (general labor work)
102Laborer, skilled (assisting skilled craft journeyman)
103Laborer, Landscaping (gardener, sod layer and nursery operator)
104Flag person
105Watch person
106Blaster
107Pipelayer (water, sewer and gas)
108Tunnel miner
109Underground and open ditch laborer (eight feet below starting grade level)
110Survey field technician
111Traffic control person (temporary signage)
112Quality control tester

Subp. 2a.Special equipment.

Code No.Position Title
201Articulated hauler
202Boom truck
203Landscaping equipment, includes hydro seeder or mulcher, sod roller, farm tractor with attachment specifically seeding sodding, or plant, and two-framed forklift (excluding front, posi-track, and skid steer loaders), no earthwork or grading for elevations
204Off-road truck
205Pavement marking or marking removal equipment (one or two person operators); self-propelled, truck or trailer mounted units. The nature of the work performed by the operator of this equipment is the application of and removal of pavement marking. Normally paint is applied, but tape is also used to mark these lines. The systems on this equipment include skip line controllers, paint and bead monitoring, air pressure regulators, paint agitators and heaters, marking tape, water jet cutting, line marking grinders, vacuum collection, footage counters, mounted video camera, and laser alignment guiding tools.

Subp. 3.Power equipment operators - highway and heavy projects.

For purposes of parts 5200.1000 to 5200.1120, contractors must use codes and classifications in this subpart for paying and documenting equipment operators working on highway and heavy type construction projects.

Code No.Position Title
Group 2
302Helicopter pilot
303Concrete pump
304All cranes with over 135-foot boom, excluding jib
305Dragline, crawler, hydraulic backhoe (track or wheel mounted) and/or other similar equipment with shovel-type controls three cubic yards and over manufacturer's rated capacity including all attachments
306Grader or motor patrol
307Pile driving
308Tugboat - 100 h.p. and over when license required
Group 3
309Asphalt bituminous stabilizer plant
310Cableway
311Concrete mixer, stationary plant
312Derrick (guy or stiffleg) (power) (skids or stationary)
313Dragline, crawler, hydraulic backhoe (track or wheel mounted) and/or similar equipment with shovel-type controls, up to three cubic yards manufacturer's rated capacity including all attachments
314Dredge or engineers, dredge (power) and engineer
315Front end loader, five cubic yards and over including attachments
316Locomotive crane operator
317Mixer (paving) concrete paving, road mole, including mucking operations, Conway or similar type
318Mechanic - welder on power equipment
319Tractor - boom type
320Tandem scraper
321Truck crane - crawler crane
322Tugboat 100 h.p. and over
Group 4
323Air track rock drill
324Automatic road machine (CMI or similar)
325Backfiller operator
326Concrete batch plant operator
327Bituminous rollers, rubber tired or steel drummed (eight tons and over)
328Bituminous spreader and finishing machines (power), including pavers, macro surfacing and micro surfacing, or similar types (operator and screed person)
329Brokk or R.T.C. remote control or similar type with all attachments
330Cat challenger tractors or similar types pulling rock wagons, bulldozers, and scrapers
331Chip harvester and tree cutter
332Concrete distributor and spreader finishing machine, longitudinal float, joint machine, and spray machine
333Concrete mixer on jobsite
334Concrete mobil
335Crushing plant (gravel and stone) or gravel washing, crushing and screening plant
336Curb machine
337Directional boring machine
338Dope machine (pipeline)
339Drill rigs, heavy rotary or churn or cable drill
340Dual tractor
341Elevating grader
342Fork lift or straddle carrier
343Fork lift or lumber stacker
344Front end, posi-track, or skid steer loaders, over one cubic yard up to five cubic yards with attachments
345GPS remote operating of equipment
346Hoist engineer (power)
347Hydraulic tree planter
348Launcher person (tanker person or pilot license)
349Locomotive
350Milling, grinding, planing, fine grade, or trimmer machine
351Multiple machines, such as air compressors, welding machines, generators, pumps
352Pavement breaker or tamping machine (power driven) might mite similar type
353Pickup sweeper, one cubic yard and over hopper capacity
354Pipeline wrapping, cleaning or bending machine
355Power plant engineer, 100 KWH and over
356Power actuated horizontal boring machine, over six inches
357Pugmill
358Pumpcrete
359Rubber-tired farm tractor with backhoe including attachments
360Scraper
361Self-propelled soil stabilizer
362Slip form (power driven) (paving)
363Tie tamper and ballast machine
364Tractor, bulldozer
365Tractor, wheel type, over 50 h.p. with PTO unrelated to landscaping
366Trenching machine (sewer, water, gas) excludes walk behind trencher
367Tub grinder, morbark, or similar type
368Well point dismantling or installation
Group 5
369Air compressor, 600 CFM or over
370Bituminous roller (under eight tons)
371Concrete saw (multiple blade) (power operated)
372Form trench digger (power)
373Front end, skid steer, or posi-track loaders, up to and including one cubic yard with attachments
374Gunite gunall
375Hydraulic log splitter
376Loader (barber greene or similar type)
377Post hole driving machine/post hole auger
378Power actuated auger and boring machine
379Power actuated jack
380Pump
381Self-propelled chip spreader (flaherty or similar)
382Sheep foot compactor with blade - 200 h.p. and over
383Shouldering machine (power) apsco or similar type including self-propelled sand and chip spreader
384Stump chipper and tree chipper
385Tree farmer (machine)
Group 6
387Cat, challenger, or similar type of tractors, when pulling disk or roller
388Conveyor
389Dredge deck hand
390Fire person or tank car heater
391Gravel screening plant (portable not crushing or washing)
392Greaser (tractor)
393Lever person
394Oiler (power shovel, crane, truck crane, dragline, crushers, and milling machines, or other similar heavy equipment)
395Power sweeper
396Sheep foot roller and rollers on gravel compaction, including vibrating rollers
397Tractor, wheel type, over 50 h.p., unrelated to landscaping

Subp. 3a.Power equipment operators commercial projects.

For purposes of parts 5200.1000 to 5200.1120, contractors must use codes and classifications in this subpart for paying and documenting power equipment operators working on commercial type projects.

Code No.Position Title
Group 1
501Helicopter pilot
502Tower crane 250 feet and over
503Truck or crawler crane with 200 feet of boom and over, including jib
Group 2
504Concrete pump with 50 meters/164 feet of boom and over
505Pile driving when three drums in use
506Tower crane 200 feet and over
507Truck or crawler crane with 150 feet of boom up to and not including 200 feet, including jib
Group 3
508All-terrain vehicle cranes
509Concrete pump 32-49 meters/102-164 feet
510Derrick (guy&stiffleg)
511Stationary tower crane up to 200 feet
512Self-erecting tower crane 100 feet and over measured from boom foot pin
513Traveling tower crane
514Truck or crawler crane up to and not including 150 feet of boom, including jib
Group 4
515Crawler backhoe including attachments
516Fireperson, chief boiler license
517Hoist engineer (three drums or more)
518Locomotive
519Overhead crane (inside building perimeter)
520Tractor - boom type
Group 5
521Air compressor 450 CFM or over (two or more machines)
522Concrete mixer
523Concrete pump up to 31 meters/101 feet of boom
524Drill rigs, heavy rotary or churn or cable drill when used for caisson for elevator or building construction
525Forklift
526Front end, posi-track, and skid steer type loaders one cubic yard and over, including attachments
527Hoist engineer (one or two drums)
528Mechanic-welder (on power equipment)
529Power plant (100 KW and over or multiples equal to 100 KW and over)
530Pump operator and/or conveyor (two or more machines)
531Self-erecting tower crane under 100 feet measured from boom foot pin
532Straddle carrier
533Tractor over D2
534Well point pump
Group 6
535Concrete batch plant
536Fireperson, first class boiler license
537Front end, posi-track, and skid steer type loaders up to one cubic yard, including attachments
538Gunite machine
539Tractor operator D2 or similar size
540Trenching machine (sewer, water, gas) excludes walk behind trencher
Group 7
541Air compressor 600 CFM or over
542Brakeperson
543Concrete pump/pumpcrete or complaco type
544Fireperson, temporary heat second class boiler license
545Oiler (power shovel, crane, truck crane, dragline, crushers and milling machines, or other similar power equipment)
546Pick-up sweeper (one cubic yard hopper capacity)
547Pump and/or conveyor
Group 8
548Elevator operator
549Greaser
550Mechanical space heater (temporary heat no boiler license required)

Subp. 4.Truck drivers.

Code No.Position Title
Group 1
601Mechanic - welder (on vehicles in Code Nos. 602 through 616)
602Tractor trailer driver
603Truck driver (hauling machinery including operation of hand and power operated winches)
Group 2
604Four or more axle unit, straight body truck
Group 3
605Bituminous distributor driver
606Bituminous distributor (one person operation)
607Three axle units
Group 4
608Bituminous distributor spray operator (rear and oiler)
609Dump person
610Greaser
611Pilot car driver
612Rubber-tired, self-propelled packer, under eight tons
613Two axle unit
614Slurry operator
615Tank truck helper (gas, oil, road oil, and water)
616Tractor operator, under 50 h.p.

Subp. 4a.Unit.

For the purposes of subpart 4, "unit" refers to all axles including the steering axle.

Subp. 5.Special crafts.

Code No.Position Title
701Heating and frost insulators
702Boilermakers
703Bricklayers
704Carpenters
705Carpet layers (linoleum)
706Cement masons
707Electricians
708Elevator constructors
709Glaziers
710Lathers
711Ground person
712Ironworkers
713Lineman
714Millwright
715Painters (including hand brushed, hand sprayed, and the hand taping of pavement markings)
716Piledriver
717Pipefitters - steamfitters
718Plasterers
719Plumbers
720Roofer/waterproofer
721Sheet metal workers
722Sprinkler fitters
723Terrazzo workers
724Tile setters
725Tile finishers
726Drywall taper
727Wiring system technician; technology circuits or systems technician
728Wiring system installer; technology circuits or systems installer
729Asbestos abatement worker or environmental remediation worker
730Sign erector

Subp. 6.Wage determinations.

Wage determinations shall be made for other classifications not listed if such other classifications are in general use in the area being surveyed.

Minn. R. agency 151, ch. 5200, PREVAILING WAGE DETERMINATIONS, pt. 5200.1100

15 SR 965; 17 SR 1279; 19 SR 482; 21 SR 1107; 33 SR 1598; 33 SR 1695; 35 SR 1711

Statutory Authority: MS s 14.06; 175.171; 177.28; 177.41 to 177.44