Md. Code Regs. 11.14.09.24

Current through Register Vol. 51, No. 20, October 4, 2024

Section 11.14.09.24 - Vehicle Identification Number

A. As required under Federal Motor Vehicle Safety Standards 49 CFR § 571.500, Standard No. 500 Low Speed Vehicles, the manufacturers of all low speed vehicles shall legibly inscribe the vehicle identification number (VIN) that conforms to the requirements of 49 CFR Part 565 Vehicle Identification Number. Each VIN shall consist of 17 characters.

Procedures:	Reject Vehicle If:
(1) Inspect vehicle for manufacturer's vehicle identification number.	(1) Manufacturer's vehicle identification number is missing, altered, or fails to contain the properly required 17 characters.
Agency Note: State assigned VIN plates when attached in place of manufacturer's VIN are acceptable.

Regulations .24 adopted as an emergency provision effective January 1, 2006 (33:4 Md. R. 349); emergency provision extended at 33:15 Md. R. 1275; emergency status expired December 28, 2006
Regulations .24 adopted as an emergency provision effective March 9, 2007 (34:9 Md. R. 824); emergency provision expired September 5, 2007
Regulations .24 adopted effective September 10, 2007 (34:18 Md. R. 1580)