La. Admin. Code tit. 33 § III-1323

Current through Register Vol. 50, No. 9, September 20, 2024

Section III-1323 - Emissions from Abrasive Blasting

A. Purpose. The purpose of this Subchapter is to reduce particulate matter emissions from facilities that engage in abrasive blasting.

B. Scope. This Subchapter applies to any facility or contractor in the state that engages in or contracts to provide on-site abrasive blasting and that is classified under a Standard Industrial Classification (SIC) Code beginning with 34, 35, or 37 or under SIC Code 1622 or 1721.

C. Compliance. Compliance with these regulations does not eliminate the requirement to comply with any other state or federal regulation or any specific condition of a permit granted by the department.

1. Any new facility that is constructed after promulgation of these regulations shall comply with all of the requirements of this Subchapter before operation may commence.

2. Existing affected facilities shall comply with all of the requirements of this Subchapter as soon as practicable, but no later than one year after promulgation of these regulations.

La. Admin. Code tit. 33, § III-1323

Promulgated by the Department of Environmental Quality, Office of the Secretary, Legal Affairs Division, LR 33:822 (May 2007).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:2054(B)(1).