Section 864 IAC 1.1-7-2 - Design and contents of sealAuthority: IC 25-31-1-7; IC 25-31-1-8
Affected: IC 25-31-1-16
Sec. 2.
(a) The engineer seal shall generally be between one and five-eighths (1 5/8) inches and one and seven-eighths (1 7/8) inches in outside diameter, using the following Click here to view Image
Plans containing an engineer seal of specified size may be reduced as long as the seal remains legible.
(b) The seal may be embossed, electronically applied to a drawing, or applied by a rubber stamp in conformance with the design as shown in subsection (a). The seal may have a milled edge, as shown, or two (2) concentric circles with the outer and inner circles corresponding with the respective edges of the milling.(c) The name and registration number of the registrant inscribed on the seal shall correspond to the name and certificate number inscribed on the certificate of registration. However, the letters "PE" may be excluded from the certificate number.State Board of Registration for Professional Engineers; Rule 7, Sec 2; filed Feb 29, 1980, 3:40 p.m.: 3 IR 632; filed Oct 17, 1986, 2:20 p.m.: 10 IR 441; filed Sep 24, 1992, 9:00 a.m.: 16 IR 729; filed Mar 28, 1995, 2:00 p.m.: 18 IR 2109; readopted filed Jun 21, 2001, 9:01 a.m.: 24 IR 3824; readopted filed Jul 19, 2007, 12:56 p.m.: 20070808-IR-864070063RFAReadopted filed 11/22/2016, 12:27 p.m.: 20161221-IR-864160321RFAReadopted filed 7/20/2022, 8:12 a.m.: 20220817-IR-864220189RFAReadopted filed 5/30/2024, 9:44 a.m.: 20240626-IR-864230822RFA