Section 11-20-15 - Certified laboratories(a) For the purpose of determining compliance with sections 11-20-9 through 11-20-14, 11-20-34, 11-20-35, 11-20-46(d), 11-20-48, and 11-20-50, samples may be considered only if they have been analyzed by a laboratory certified by the director as specified in EPA 815-R-05-004 "Manual for the Certification of Laboratories Analyzing Drinking Water", 5th edition, January 2005, except that measurements for turbidity, disinfectant residual, temperature, alkalinity, calcium, conductivity, orthophosphate, silica, and pH may be performed by any person acceptable to the director. (b) Nothing in this chapter shall be construed to preclude the director from taking samples or from using the results from such samples to determine compliance by a supplier of water with the applicable requirements of this chapter.[Eff 12/26/81; am and comp 3/7/92; am and comp 1/2/93; am and comp 12/15/94; am and comp 10/13/97; comp 9/7/99; am and comp 11/30/02; comp 12/16/05; comp 11/2 8/11; am and comp MAY 02 2014 ] (Auth: HRS §§ 340E-2, 340E-9) (Imp: HRS §§ 340E-2, 340E-9; 42 U.S.C. §§ 300g-1, 300g-2; 40 C.F.R. Parts 141, 142, § 141.28, § 142.10 )