40 C.F.R. § 426.86
Current through October 31, 2024
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 . In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart. Because of the recognition that animal and vegetable oils can be adequately removed in a publicly owned treatment works, whereas mineral oil may not be readily removed and may pass through untreated, two separate limitations are established.
| Pollutant or pollutant property | Pretreatment standards | |
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed- | |
| Metric units (g/kkg of furnace pull) | ||
| Oil (animal and vegetable) | (1) | (1) |
| Oil (mineral) | 60.0 | 30.0 |
| TSS | (1) | (1) |
| pH | (1) | (1) |
| English units (lb/1,000 lb of furnace pull) | ||
| Oil (animal and vegetable) | (1) | (1) |
| Oil (mineral) | 0.06 | 0.03 |
| TSS | (1) | (1) |
| pH | (1) | (1) |
1 No limitation.
40 C.F.R. §426.86