Section 4583 - Stopping Limits(a) All mills irrespective of the size of the rolls or their arrangement (individually or group-driven) shall be stopped within a distance, as measured in inches of surface travel, not greater than 1 1/2 percent of the peripheral no-load surface speeds of the respective rolls as determined in feet per minute.(b) All measurements on mills and calenders shall be taken with the rolls running empty at maximum operating speed. Stopping distances shall be expressed in inches of surface travel of the roll from the instant the emergency stopping device is actuated.Cal. Code Regs. Tit. 8, § 4583
1. Repealer and new section filed 10-25-74; effective thirtieth day thereafter (Register 74, No. 43).
2. Amendment filed 4-25-86; effective thirtieth day thereafter (Register 86, No. 17). Note: Authority cited: Section 142.3, Labor Code. Reference: Section 1423, Labor Code.
1. Repealer and new section filed 10-25-74; effective thirtieth day thereafter (Register 74, No. 43).
2. Amendment filed 4-25-86; effective thirtieth day thereafter (Register 86, No. 17).