Cal. Code Regs. Tit. 8, div. 1, ch. 4, subch. 7, grp. 3, art. 21, tbl. A-5

Current through Register 2024 Notice Reg. No. 45, November 8, 2024

Table A-5 - Minimum Dimensions for Straight Flanges Used as Wheel Sleeves for Precision Grinding Only

		B	D	E
Wheel Diameter	Wheel Hole Diameter	Minimum Outside Diameter of Flange	Minimum Thickness of Flange at Bore	Minimum Thickness of Flange at edge of Undercut
Inches	Inches	Inches	Inches	Inches
12 to 14	5	7	1/8	7/16
	5	7	3/8	7/16
	6	8	3/8	7/16
Larger than 14 to 20	8	10	3/8	7/16
	10	11 1/2	3/8	7/16
	12	13 1/2	3/8	7/15
	8	10	3/4	1/2
Larger than 20 to 30	10	11 1/2	3/4	1/2
	12	13 1/2	3/4	1/2
	15	17 1/2	3/4	1/2
	12	13 1/2	3/4	1/2
	16	17 1/2	3/4	1/2
Larger than 30 to 42	18	19 1/2	3/4	1/2
	20	21 1/2	3/4	1/2
	16	20	1	3/4
Larger than 42 to 60	20	24	1	3/4
	24	29	1 1/8	7/8

Cal. Code Regs. Tit. 8, div. 1, ch. 4, subch. 7, grp. 3, art. 21, tbl. A-5

1. New NOTE filed 11-22-85; effective thirtieth day thereafter (Register 85, No. 48).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.