Cal. Code Regs. Tit. 8, div. 1, ch. 4, subch. 7, grp. 3, art. 21, tbl. A-2
Current through Register 2024 Notice Reg. No. 45, November 8, 2024
| A Diameter of Wheel | B * Minimum Outside Diameter of Flange | T Minimum Thickness of Flange |
| Inches | Inches | Inches |
| 1 | 3/8 | 1/8 |
| 2 | 1 | 1/8 |
| 3 | 1 | 3/16 |
| 4 | 1 3/8 | 3/16 |
| 5 | 1 3/4 | 1/4 |
| 6 | 2 | 3/8 |
NOTE: *Must be large enough to extend beyond the bushing. Where prong anchor or cupback bushing are used, this footnote does not apply.
Cal. Code Regs. Tit. 8, div. 1, ch. 4, subch. 7, grp. 3, art. 21, tbl. A-2
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.