Section 557.13 - "M" Definitions(a) Maintenance. A thorough examination of the fire extinguisher done in accordance with the manufacturer's written instructions and the requirements of this chapter. It is intended to give maximum assurance that a fire extinguisher will operate effectively and safely. Maintenance includes a thorough examination and any necessary repair or replacement. Maintenace will normally reveal if hydrostatic testing or internal maintenance is required.(b) Master Gauge, Low Pressure Test Equipment. A master gauge is a pressure indicating device that is used as a calibration standard and has an inherent accuracy equal to or better than the requirement for the pressure indicating device being verified. Master gauge calibration shall comply with the Section 12500 of the California Business and Profession Code by a third party using a dead weight test device or an electronic pressure measuring device of appropriate accuracy. A master gauge shall not be used as a pressure indicating device.(c) Marketing. The act of selling. [See Section 557.19(a)].(d) Mild steel shell. Except for stainless steel and steel used for high pressure cylinders, all other steel shells are defined as "mild steel" shells.Cal. Code Regs. Tit. 19, § 557.13
1. Amendment filed 3-4-92; operative 4-3-92 (Register 92, No. 15).
2. Amendment of subsection (a) filed 12-27-2001; operative 1-1-2002 pursuant to Government Code section 11343.4 (Register 2001, No. 52).
3. New subsection (b) and subsection relettering filed 7-17-2013; operative 10-1-2013 (Register 2013, No. 29). Note: Authority cited: Section 13160, Health and Safety Code. Reference: Sections 13160 and 13162, Health and Safety Code.
1. Amendment filed 3-4-92; operative 4-3-92 (Register 92, No. 15).
2. Amendment of subsection (a) filed 12-27-2001; operative 1-1-2002 pursuant to Government Code section 11343.4 (Register 2001, No. 52).
3. New subsection (b) and subsection relettering filed 7-17-2013; operative 10-1-2013 (Register 2013, No. 29).