Test data referred to in Vehicle Code Section 26104 for equipment subject to regulations established by the department under Vehicle Code Section 26103 shall include the following information:
(a) The date of the test report.(b) The date tests were conducted.(c) The standard or regulation with which the device complies.(d) A description of the device.(e) The type of material used for each major component.(f) Data for plastic material used in optical parts.(g) Where reflex sheeting is used, the sheeting manufacturer's designation for the particular material used in the device.(h) The bulb socket dimensions or a statement that the socket meets maximum and minimum bulb support gage requirements.(i) Trade number and quantity of bulbs used.(j) The voltage and current at which laboratory standard bulbs were operated to obtain rated mean spherical candlepower.(k) A list of the marks of identification, including size, location, and method of marking.(l) Photographs or halftone prints of the assembled and disassembled device.(m) The actual results obtained for each test or measurement required by this title or by applicable sections of Federal Motor Vehicle Safety Standards, Federal Consumer Product Safety Commission regulations, and their referenced specifications. Words such as "complies," "passed," "less than," or "more than" are not acceptable where minimum or maximum requirements are specified in measurable units, except for detailed dimensional checks of sealed lighting units and housings for such units checked by go-no-go gages.Cal. Code Regs. Tit. 13, § 625
Note: Authority cited: Section 26103, Vehicle Code. Reference: Sections 26103 and 26104, Vehicle Code.