Ala. Admin. Code r. 880-X-10C-.03

Current through Register Vol. 43, No. 1, October 31, 2024

Section 880-X-10C-.03 - Signs And Markers

(1) Specifications. Signs and markers required under this Part shall --

(a) Be posted and maintained by the person who conducts the surface mining operations;

(b) Be of a uniform design throughout the operation that can be easily seen and read;

(c) Be made of durable material; and

(d) Conform to local ordinances and regulations.

(2) Duration of maintenance. Signs and markers shall be maintained for the duration of all operations to which they pertain.

(3) Mine and permit identification signs.

(a) Identification signs shall be displayed at each primary point of access to the permit area from public roads.

(b) Signs shall show the name, business address, and telephone number of the person who conducts the surface mining operations and the identification number of the current permit authorizing surface mining operations.

(c) Signs shall be retained and maintained until after the release of all bonds for the permit area. The permittee shall be allowed a reasonable time to repair or replace signs that are vandalized or stolen.

(4) Perimeter markers. The perimeter of a permit area shall be clearly marked before the beginning of surface mining operations.

(5) Buffer zone markers. Buffer zones required by Rule 880-X-10C-.28 shall be clearly marked to prevent disturbance by surface operations and facilities.

(6) Topsoil markers. Where topsoil or other vegetation supporting material is segregated and stockpiled as required under Rule 880-X-10C-.09, the stockpiled material shall be clearly marked.

Author:

Ala. Admin. Code r. 880-X-10C-.03

Statutory Authority:Code of Ala. 1975, §§ 9-16-71, 72, 73, 74, 75, 76, 80, 84, 90, 92, 97.