HILLMAN, District Judge.

Stephen J. Buividas, Esq., Cherry Hill, NJ, for Plaintiffs.

Stephen S. Lippman, Esq., River Vale, NJ, for Defendant Innovated Solutions, LLC.

Kenneth Kaufmann Lehn, Esq., Winne, Banta, Hetherington, Basralian & Kahn, P.C., Court Plaza South—East Wing, Hackensack, NJ, for Defendant 3D Systems Corporation.

OPINION

HILLMAN, District Judge.

This matter comes before the Court upon motion [Doc. No. 24] of Defendant 3D Systems Corporation (hereafter, “3D Systems”), and by separate motion [Doc. No. 25] of Defendant Innovated Solutions, LLC for dismissal of the amended complaint under Federal Rule of Civil Procedure 12(b)(6). The Court has considered the submissions of the parties and decides this matter pursuant to Federal Rule of Civil Procedure 78.

For the reasons that follow, Defendant 3D Systems' motion to dismiss is granted. Defendant Innovated Solutions' motion is granted in part and denied in part.

I. JURISDICTION

The Court exercises subject matter jurisdiction over this matter pursuant to 28 U.S.C. § 1332, as the complaint seeks damages in excess of $75,000 and the controversy is between citizens of different states.

II. BACKGROUND

On August 2, 2013, Plaintiffs, Rapid Models & Prototypes, Inc. (hereafter, “RMP”), Joseph Pizzo and Angela Pizzo, filed a civil action in the Superior Court of New Jersey, Law Division, Camden County. Defendant 3D Systems removed the action to this Court based upon diversity of citizenship. (Not. of Removal ¶ 2 [Doc. No. 1].) Defendants 3D Solutions and Innovated Solutions thereafter filed motions to dismiss the complaint. In response, Plaintiffs filed an amended complaint [Doc. No. 22], thereby mooting the motions to dismiss. Defendants contend that Plaintiffs' amendments did not cure the deficiencies identified in their first motion to dismiss, and consequently they filed the motions to dismiss presently before the Court.

According to the allegations in the amended complaint, 3D Systems manufactures a three-dimensional printer, called the Projet SD 3000 3D Printer with Projet Accelerator Software and Projet Finisher (hereafter, the “machine”), which is purportedly capable of “taking formless raw materials and molding them into specific mass-produced items which could then be sold as finished products or utilized in the creation of other products or materials.” (Am. Compl. ¶¶ 8, 9.) In or about May of 2011, Plaintiff RMP entered into an equipment lease for the machine with U.S. Bancorp Manifest Funding Services (hereafter, “Bancorp”). (Id. ¶ 8.) The lease provided that the machine and related materials were to be supplied by Defendant Innovated Solutions. (Id. )

Pursuant to the lease, Plaintiff RMP was obligated to make sixty monthly payments of $1350.44, plus taxes, and at the end of the lease term was entitled to purchase the machine for a nominal sum. (Id. ) Plaintiffs contend that the lease agreement was “merely a financing vehicle” and was “in reality, a sales contract pursuant to which defendant Innovat[ed] agreed to transfer the machine from defendant Innovat[ed] to plaintiff RMP[.]” (Id. ) Innovated Solutions is allegedly an “officially authorized reselling agent” for 3D Systems. (Id. ¶ 9.)

Plaintiffs allege that Innovated Solutions was aware that RMP intended to use the machine to perform specific tasks that were critical to RMP's business, and that a properly functioning machine was an essential component of the operation of RMP's business. (Id. ¶ 10.) Plaintiffs also allege that 3D Systems knew or should have known when manufacturing the machine that it would be put to a specific use in the manner intended by RMP. (Id. ) Further, Plaintiffs allege that the machine was sold subject to certain warranties by the defendants, including an express warranty by 3D Systems. (Id. ¶ 11.)

Plaintiffs aver that RMP discovered “[a]lmost immediately” after acquiring the machine that it was defective in that it did not perform the functions it was designed to perform and for which it had allegedly been acquired. (Id. ¶ 14.) Plaintiffs specifically state that the machine and its parts were “substandard,” and the defects included malfunctioning electronic chips, rejected cartridges, a defective solenoid lock mechanism, and unreliable circuitry. (Id. ) These alleged malfunctions and inadequacies caused product defects and customer complaints, which purportedly resulted in delay, lost production time, costly replacement, a repeated inability to meet delivery schedules and, ultimately, a loss of RMP's customers. (Id. ) Although Plaintiffs allegedly notified Innovated Solutions of the ineffectiveness of the machine and requested immediate repairs and adjustments, neither Innovated Solutions nor 3D Systems could rectify the defects so that the machine could be put to effective use. (Id. ¶ 15.) Plaintiffs assert that as a result of RMP's inability to utilize the machine, RMP has lost present and existing customers, as well as future business prospects. (Id. ¶ 16.)

Plaintiffs thus instituted the present civil action in which they assert a number of claims against each of the defendants. Plaintiffs assert a claim for breach of contract against Innovated Solutions only (Count I). Further, Plaintiffs assert against both defendants claims for breach of the implied warranty of merchantability (Counts II and V), breach of the implied warranty of fitness (Counts III and VI), breach of the implied warranty of fitness for a particular purpose (Counts IV and VII), breach of express warranty (Count VIII), fraud (Count IX), negligent misrepresentation (Count X), and violation of the New Jersey Consumer Fraud Act (Count XI).

Defendants seek dismissal of the complaint for failure to state a claim pursuant to Federal Rule of Civil Procedure 12(b)(6). Defendants also seek dismissal of the claims for fraud, negligent misrepresentation and violation of the New Jersey Consumer Fraud Act for failure to meet the heightened specificity requirement under Federal Rule of Civil Procedure 9(b).

III. STANDARD FOR MOTIONS TO DISMISS

In considering whether Plaintiffs' amended complaint fails to state a claim, the Court must accept all well-pleaded allegations in the complaint as true and view them in the light most favorable to the plaintiff. Evancho v. Fisher, 423 F.3d 347, 350 (3d Cir.2005) ; see also Phillips v. Cnty. of Allegheny, 515 F.3d 224, 228 (3d Cir.2008) (“[I]n deciding a motion under Fed.R.Civ.P. 12(b)(6), [a district court is] ... required to accept as true all factual allegations in the complaint and draw all inferences from the facts alleged in the light most favorable to” the plaintiff). A pleading is sufficient if it contains “a short and plain statement of the claim showing that the pleader is entitled to relief.” Fed.R.Civ.P. 8(a)(2).

A district court, in weighing a motion to dismiss, asks “ ‘not whether a plaintiff will ultimately prevail but whether the claimant is entitled to offer evidence to support the claims[.]’ ” Bell Atl. Corp. v. Twombly, 550 U.S. 544, 563 n. 8, 127 S.Ct. 1955, 167 L.Ed.2d 929 (2007) (quoting Scheuer v. Rhodes, 416 U.S. 232, 236, 94 S.Ct. 1683, 40 L.Ed.2d 90 (1974) ); see also Ashcroft v. Iqbal, 556 U.S. 662, 684, 129 S.Ct. 1937, 173 L.Ed.2d 868 (2009) (“Our decision in Twombly expounded the pleading standard for ‘all civil actions[.]’ ”) (citation omitted). Under the Twombly/Iqbal standard, a district court first “must accept all of the complaint's well-pleaded facts as true, but may disregard any legal conclusions.” Fowler v. UPMC Shadyside, 578 F.3d 203, 210–11 (3d Cir.2009) (citing Iqbal, 556 U.S. at 678, 129 S.Ct. 1937 ). Second, a district court “must then determine whether the facts alleged in the complaint are sufficient to show that the plaintiff has a ‘plausible claim for relief.’ ” Fowler, 578 F.3d at 211 (citing Iqbal, 556 U.S. at 679, 129 S.Ct. 1937 ). “[A] complaint must do more than allege the plaintiff's entitlement to relief.” Fowler, 578 F.3d at 211 ; see also Phillips, 515 F.3d at 234 (“The Supreme Court's Twombly formulation of the pleading standard can be summed up thus: ‘stating ... a claim requires a complaint with enough factual matter (taken as true) to suggest’ the required element. This ‘does not impose a probability requirement at the pleading stage,’ but instead ‘simply calls for enough facts to raise a reasonable expectation that discovery will reveal evidence of’ the necessary element.”) (citing Twombly, 550 U.S. at 556, 127 S.Ct. 1955 ). “The defendant bears the burden of showing that no claim has been presented.” Hedges v. United States, 404 F.3d 744, 750 (3d Cir.2005).

Finally, a court in reviewing a Rule 12(b)(6) motion must consider the facts alleged in the pleadings, the documents attached thereto as exhibits, and matters of public record. Guidotti v. Legal Helpers Debt Resolution, 716 F.3d 764, 772 (3d Cir.2013). A court may also consider “ ‘undisputedly authentic documents if the complainant's claims are based upon these documents [.]’ ” Id. (quoting Mayer v. Belichick, 605 F.3d 223, 230 (3d Cir.2010) ). If any other matters outside the pleadings are presented to the court, and the court does not exclude those matters, a Rule 12(b)(6) motion will be treated as a summary judgment motion pursuant to Rule 56. Fed.R.Civ.P. 12(d).

As noted above, Defendants contend that Plaintiffs' claims for fraud, negligent misrepresentation and a violation of the New Jersey Consumer Fraud Act must be pleaded with heightened particularity. For claims of fraud, Federal Rule of Civil Procedure 9(b) imposes a heightened pleading requirement, over and above that of Rule 8(a). Specifically, it requires that “in alleging fraud or mistake, a party must state with particularity the circumstances constituting fraud or mistake.” Fed.R.Civ.P. 9(b). “Malice, intent, knowledge, and other conditions of a person's mind,” however, “may be alleged generally.” Id. This heightened pleading standard requires a plaintiff to “state the circumstances of the alleged fraud with sufficient particularity to place the defendant on notice of the ‘precise misconduct with which [it is] charged.’ ” Frederico v. Home Depot, 507 F.3d 188, 200 (3d Cir.2007) (internal citation omitted).

“The purpose of Rule 9(b) is to provide notice of the ‘precise misconduct’ with which defendants are charged and to prevent false or unsubstantiated charges.” Rolo v. City Investing Co. Liquidating Trust, 155 F.3d 644, 658 (3d Cir.1998). Thus, to satisfy this heightened standard, “the plaintiff must plead or allege the date, time, and place of the alleged fraud or otherwise inject precision or some measure of substantiation into a fraud allegation.” Frederico, 507 F.3d at 200. “Plaintiffs also must allege who made a misrepresentation to whom and the general content of the misrepresentation.” Lum v. Bank of Am., 361 F.3d 217, 224 (3d Cir.2004) (internal citation omitted), abrogated on other grounds by Twombly, 550 U.S. at 561–63, 127 S.Ct. 1955.

IV. DISCUSSION

A. Choice of Law Principles

Since the claims in this case are based on state law, at the outset the Court must determine which law to apply to each claim. None of the parties addressed the choice of law issue in their briefs, and all parties cited only New Jersey law in connection with the pending motions to dismiss. The Court, by Order dated November 20, 2014, required the parties to submit supplemental briefing on the choice of law issue. In the Order, the Court noted that South Carolina, Pennsylvania and New Jersey have an interest in this matter since the parties are citizens of these states. (See Order [Doc. No. 32] 1–2.)

In diversity cases, federal courts apply the forum state's choice of law rules to determine which state's substantive laws are controlling. Maniscalco v. Brother Int'l (USA) Corp., 709 F.3d 202, 206 (3d Cir.2013) (citing Klaxon Co. v. Stentor Elec. Mfg. Co., Inc., 313 U.S. 487, 496, 61 S.Ct. 1020, 85 L.Ed. 1477 (1941) ). In conducting the choice of law analysis, New Jersey employs the “most significant relationship” test of the Restatement (Second) of Conflict of Laws. P.V. v. Camp Jaycee, 197 N.J. 132, 155, 962 A.2d 453 (2008) (“In balancing the relevant elements of the most significant relationship test, we seek to apply the law of the state that has the strongest connection to the case.”). This analysis, which must be performed on an issue-by-issue basis, consists of two steps. First, the Court must determine whether an actual conflict exists between New Jersey law and the law of a competing state. Snyder v. Farnam Cos., Inc., 792 F.Supp.2d 712, 717 (D.N.J.2011). If no conflict exists, then the Court applies the law of the forum state. Id. Second, if an actual conflict exists, the Court must determine which state has the most significant relationship to the claim.Id. In making this determination, the Court must weigh the factors set forth in the Restatement that correspond to the plaintiff's cause of action. Id.

In response to the Court's Order, Defendants argue that New Jersey law applies because the parties implicitly agreed that Plaintiffs' claims are subject to New Jersey law. (Def. 3D Systems Corporation's Supp. Br. Regarding Choice of Law (hereafter, “Def. 3D System's Supp. Br.”) 1.) Plaintiffs, in response, argue that they never conceded that New Jersey law applies to their claims, having cited New Jersey law only because they initially filed their complaint in New Jersey Superior Court and because New Jersey law was the only law cited by Defendants in connection with the motion to dismiss. (Pls.' Supp. Br. Regarding Choice of Law (hereafter, “Pls.' Supp. Br.”) 1.) 3D Systems filed a reply brief, with leave of Court, in which it argues that because Plaintiffs initially filed the case in New Jersey state court, New Jersey law must be applied to this case. (Def. 3D Systems Corp.'s Reply Br. Regarding Choice of Law 1.) The Court rejects this argument. See, e.g., O'Boyle v. Braverman, 337 Fed.Appx. 162 (3d Cir.2009) (after case was removed from New Jersey state court, district court properly conducted choice of law analysis and concluded that Tennessee law applied to case), cert. denied, 558 U.S. 1112, 130 S.Ct. 1058, 175 L.Ed.2d 884 (2010) ; Ciecka v. Rosen, 908 F.Supp.2d 545, 553, 556 (D.N.J.2012) (although case was removed from New Jersey state court, district court conducted choice of law analysis and concluded that Pennsylvania had most significant relationship with case).

Defendants also argued that under the “most significant relationship test,” New Jersey law would govern all of the claims in this case. (Def. 3D System's Supp. Br. 6–12.) In its analysis, Defendant 3D Systems did not address whether there is an actual conflict of laws with respect to each claim. (Id. at 5–6.) Instead, Defendant 3D Systems considered only the second prong and concluded that New Jersey has the most significant relationship to each claim given analysis of the factors set forth in the Restatement (Second) of Conflict of Laws. (Id. at 12.)

Plaintiffs argue that it is premature for the Court to resolve the choice of law issue at this early stage of litigation. The Court notes that “ ‘it can be inappropriate or impossible for a court to conduct [a choice of law] analysis at the motion to dismiss stage when little or no discovery has taken place.’ ” Snyder, 792 F.Supp.2d at 718 (quoting In re Samsung DLP Television Class Action Litig., Civ. No. 07–2141, 2009 WL 3584352, at *3 (D.N.J. Oct. 27, 2009) ). However, as noted in Snyder, “ ‘[s]ome choice of law issues may not require a full factual record and may be amenable to resolution on a motion to dismiss.’ ” Id. (quoting Harper v. LG Elecs. USA, Inc., 595 F.Supp.2d 486, 491 (D.N.J.2009) ). The Court should make a threshold inquiry into whether a choice of law analysis is appropriate at the motion to dismiss stage, by determining whether the choice of law issues require a full factual record or not. Id. The factual record may be sufficient for certain choice of law determinations but not others. See id. As such, the Court will conduct a threshold choice of law analysis for each issue, and determine whether additional discovery is necessary to conclude the analysis.

B. Count VIII—Breach of Express Warranty

In Count VIII, Plaintiffs aver that Defendants promised that the machine would “perform the operations and functions of similar machines, would be reliable, and would be promptly and effectively repaired in the event that it failed to perform as indicated[.]” (Am. Compl. ¶ 52.) In addition, Defendants purportedly “stated specifically that the machine would be free from defects in materials and workmanship when used under normal conditions as described by 3D.” (Id. ) These promises were allegedly “contained in brochures, videos, advertisements and promotional materials, and writings and memoranda of various types, all of which were disseminated to the public, and were also communicated to plaintiff RMP directly by principals and employees of defendants, including, but not limited to, Eric Wonderling.” (Id. ¶ 53.)

In support of their motions to dismiss, Defendants rely upon the Warranty attached to the Declaration of John Calhoun, the Senior Director of Sales, Americans for 3D Systems (hereafter, the “Warranty”). (Mem. of Law in Supp. of Def. 3D Systems Corp.'s Mot. to Dismiss 9–10; Mem. of Law in Supp. of Def. Innovated Solutions, LLC's Mot. to Dismiss (hereafter, “Def. Innovated Solutions' Br.”) 9–10.) Plaintiffs argue that the Court should not consider the Warranty because it is extraneous to the pleadings. (Pl.'s Mem. of Law in Opp. to Defs.' Mot. to Dismiss (hereafter, “Pl.'s Opp. Br.”) 9–10.) Moreover, Plaintiffs assert that their express warranty claim is based on various sources including 3D System's website and written materials which accompanied the machine. (Id. at 11.) Plaintiffs concede that the language in the Warranty “is one of various sources for the express warranty language which is the basis for plaintiffs' claim[.]” (Id. ) Plaintiffs insist, however, that the Warranty attached to the Calhoun Declaration is not the warranty upon which their claims are based. (Id. )

As noted above, the Court may consider a document that is “integral to or explicitly relied upon” in the complaint, without converting the motion into a motion for summary judgment. In re Burlington

Coat Factory Sec. Litig., 114 F.3d 1410, 1426 (3d Cir.1997). The purpose of this rule is assure that the court, when examining a claim based on an isolated statement in a document, can consider the full context of the document and not just the excerpt contained in the plaintiff's complaint. See id. The Third Circuit has noted that “Plaintiffs cannot prevent a court from looking at the texts of the documents on which its claim is based by failing to attach or explicitly cite them.” Id.

In this case, Plaintiffs do not dispute the authenticity of the Warranty. Plaintiffs argue that their claim is not based on this document, even though they concede that it contains the same language as the warranty upon which their claim relies. The Court notes Plaintiffs' assertion that the “same warranty language was available, for example, on 3D's website, and in written materials which accompanied the machine.” (Pl.'s Opp. Br. 11.) The Court also notes Mr. Calhoun's assertion that the Warranty attached to his Declaration was “provided to 3D Systems's re-sellers such as Innovated Solutions” and was also “publicly available on the 3D Systems website, to which consumers were directed.” (Decl. of John Calhoun ¶ 4.) Plaintiffs nonetheless insist that the Warranty is not the source of their express warranty claim.

The Court finds at this time that the Amended Complaint fails to satisfy the pleading requirements of Federal Rule of Civil Procedure 8 insofar as Plaintiffs attempt to allege a claim for breach of express warranty. The Court recognizes that Federal Rule of Civil Procedure 8(a)(2) requires a party to assert only a “short and plain statement of the claim showing that the pleader is entitled to relief” so as to give the defendant “fair notice of what the ... claim is and the grounds upon which it rests.” Twombly, 550 U.S. at 554, 127 S.Ct. 1955. Plaintiffs must, however, assert enough factual allegations that “raise a right to relief above the speculative level[.]” Id.

Here, Plaintiffs' express warranty claim is based on an unspecified warranty that was purportedly “contained in brochures, videos, advertisements, and promotional materials,” as well as “writings and memoranda of various types [.]” (Am. Compl. ¶ 53.) Plaintiffs do not directly quote the warranty in their amended complaint, did not attach a copy of the warranty to their pleadings, and did not identify with any specificity the source of their warranty claim. Even now, when faced with the Warranty attached to the Calhoun Declaration, Plaintiffs do not provide a different version of a warranty. Based on the allegations in the amended complaint, Defendant 3D Systems identified a document that it believes forms the basis of Plaintiffs' claim. Plaintiffs vehemently dispute that this document is the warranty at issue in this case, yet at no point have they provided any additional facts to apprise Defendants or the Court of the source for their express warranty claim. Defendants cannot defend against a claim for breach of an express warranty when Plaintiffs do not provide facts sufficient to identify the warranty that was allegedly breached.

Consequently, the Court concludes that Plaintiffs fail to set forth sufficient factual allegations to raise a right to relief above the speculative level with respect to their express warranty claim. Defendants' motions to dismiss are granted with respect to the claim in Count VIII for breach of express warranty, and this claim will be dismissed without prejudice.

C. Counts II through VII—Breach of Implied Warranties

In Counts II through VII, Plaintiffs assert a number of claims for breach of implied warranties, including the implied warranty of fitness, the implied warranty of merchantability, and the implied warranty of fitness for a particular purpose. Defendants argue that these claims are subject to dismissal because they disclaimed all implied warranties in the Warranty attached to the Calhoun Declaration.

1. Choice of Law

The Court at this time does not undertake a full choice of law analysis, because the law of all three interested states permits a party to disclaim implied warranties in a written warranty. See, e.g., N.J. Stat. Ann. § 12A:2–316(2) ; S.C.Code Ann. § 36–2–316(2) ; 13 Pa. Cons.Stat. Ann. § 2316. Each of these statutes permits a party to “exclude or modify the implied warranty of merchantability” by mentioning merchantability in a conspicuous writing. Similarly, all three statutes permit a party to exclude all implied warranties of fitness through a writing with a conspicuous disclaimer.

The Court also notes that a federal law, the Magnuson–Moss Act, sets forth certain requirements for disclaimers. 15 U.S.C. § 2308(a) (“No supplier may disclaim or modify (except as provided in subsection (b) of this section) any implied warranty to a consumer with respect to such consumer product if (1) such supplier makes any written warranty to the consumer with respect to such consumer product, or (2) at the time of sale, or within 90 days thereafter, such supplier enters into a service contract with the consumer which applies to such consumer product.”). “[W]here consumer products are involved this provision obviously conflicts with the UCC provisions on warranty disclaimer and prevails over the UCC and over any other State laws which do not afford consumers greater rights[.]” Gen. Motors Acceptance Corp. v. Jankowitz, 216 N.J.Super. 313, 523 A.2d 695 (N.J.Super.Ct.App.Div.1987). Therefore, to the extent a disclaimer is covered by the Magnuson–Moss Act, federal law would apply and no choice of law analysis would be necessary.

2. Analysis

As noted above, while Defendants attempt to rely on the disclaimer contained in the Warranty, Plaintiffs argue that this document is not the source of their express warranty claim. The Court, therefore, cannot consider the Warranty or the disclaimer set forth therein in deciding the present motions to dismiss. Defendants' motions to dismiss are consequently denied without prejudice. Once Plaintiffs file a revised pleading that contains sufficient detail for the parties and the Court to ascertain the source of their express warranty claim, Defendants may file a renewed motion to dismiss if they believe they have a basis to assert that the implied warranties of fitness, fitness for a particular purpose, and merchantability were properly disclaimed, under state and federal law, in the express warranty.

D. Count IX—Fraud

In Count IX, Plaintiffs assert a fraud claim based on allegations that Defendants made misrepresentations about the quality and effectiveness of the machine and its parts. Plaintiffs aver that Defendants made these misrepresentations to induce reliance on the part of Plaintiffs, and that Plaintiff RMP never would have acquired the machine but for Defendants' alleged misrepresentations. (Am. Compl. ¶¶ 61–63.)

1. Choice of Law

The statute of limitations for bringing a fraud claim differs in all three states. In New Jersey, a six-year statute of limitations applies to fraud claims. N.J. Stat. Ann. § 2A:14–1. The time period to bring an action for common law fraud in Pennsylvania is two years. 42 Pa. Cons.Stat. Ann. § 5524. The statute of limitations for a fraud claim in South Carolina is three years. S.C.Code Ann. § 15–3–530.

In this case, Plaintiffs filed their complaint on August 2, 2013. Although the amended complaint lacks specificity as to the dates of the conduct at issue in this case, which supports dismissal under Federal Rule of Civil Procedure 9(b), the Court notes that in the amended complaint Plaintiffs aver that Plaintiff RMP entered into a lease agreement in or about May of 2011 by which it became entitled to the use and possession of the machine, and that the machine did not perform as promised “[a]lmost immediately” after it was acquired. (Am. Compl. ¶¶ 8, 14.) It therefore appears that Plaintiffs discovered that the machine was defective in or about May 2011. As such, under Pennsylvania's statute of limitations, their claim for fraud would be barred because the complaint was not filed until August 2013. By contrast, the complaint would be deemed timely filed if South Carolina or New Jersey law applies to Plaintiffs' fraud claim.

Therefore, there is a conflict between the application of New Jersey's, Pennsylvania's and South Carolina's statutes of limitations to this case, and the Court must determine which one to apply. The Court thus must proceed to the second prong of the “most significant relationship” test. As applied to common law fraud claims, the Court considers the factors set forth in Section 148 of the Restatement (Second) of Conflict of Laws. Section 148 has two subsections: Section 148(1) applies when the defendant made the fraudulent representations in the same state in which the consumer relied on the representations, whereas Section 148(2) governs when the misrepresentations and the reliance occurred in different states. See Restatement (Second) of Conflict of Laws § 148.

Defendant 3D Systems argues that Section 148(1) applies because any representations were made to Plaintiffs in New Jersey and Plaintiffs acted on the alleged misrepresentations in New Jersey. (Def. 3D System's Supp. Br. 9.) Plaintiffs contend that it is premature to determine the choice of law issue in connection with this claim. (Pls.' Supp. Br. 8.)

The Court will follow the Third Circuit and other courts in this District in concluding that the alleged representations were made at Defendants' headquarters, and not in Plaintiffs' home state. See, e.g., Cooper v. Samsung Elecs. Am., Inc., 374 Fed.Appx. 250, 255 (3d Cir.2010) ; Spera v. Samsung Elecs. Am., Inc., No. Civ. A. 2:12–cv–05412, 2014 WL 1334256, at *4 (D.N.J. Apr. 2, 2014) ; Feldman v. Mercedes–Benz USA, LLC, Civ. No. 2:11–cv–00984, 2012 WL 6596830, at *6 (D.N.J. Dec. 18, 2012). Thus, this case is governed by subsection (2), under which the following contacts must be weighed:

(a) the place, or places, where the plaintiff acted in reliance upon the defendant's representations,

(b) the place where the plaintiff received the representations,

(c) the place where the defendant made the representations,

(d) the domicil, residence, nationality, place of incorporation and place of business of the parties,

(e) the place where a tangible thing which is the subject of the transaction between the parties was situated at the time, and

(f) the place where the plaintiff is to render performance under a contract which he has been induced to enter by the false representations of the defendant.

Restatement (Second) of Conflict of Laws, § 148(2).

Accepting Plaintiffs' allegations as true, the Court finds the following for purposes of the choice-of-law analysis: Plaintiffs are residents of New Jersey and received representations in New Jersey; the machine was delivered to Plaintiffs in New Jersey; the place where 3D Systems made the representations was South Carolina, and the place where Innovated Solutions made the representations was Pennsylvania, which are the places of business of these entities; and Plaintiffs were to render performance in New Jersey. Four of the six factors clearly weigh in favor of applying New Jersey law and, as such, the Court finds that the Section 148(2) factors weigh in favor of applying the law of Plaintiffs' home state, New Jersey.

2. Analysis

In New Jersey, the five elements of common law fraud are “(1) a material misrepresentation of a presently existing or past fact; (2) knowledge or belief by the defendant of its falsity; (3) an intention that the other person rely on it; (4) reasonable reliance thereon by the other person; and (5) resulting damages.” See, e.g., Panella v. O'Brien, No. 05–1790, 2006 WL 2466858, *8 (D.N.J. Aug. 24, 2006).

Under Rule 9(b), as set forth above, a plaintiff must allege in connection with a fraud claim the date, time, and place of the alleged fraud or otherwise inject precision or some measure of substantiation into a fraud allegation. Frederico, 507 F.3d at 200. A plaintiff must also allege who made the misrepresentation to whom and the general content of the misrepresentation. Lum, 361 F.3d at 224.

Plaintiffs concede that their complaint lacks detail. They assert that they intend to identify in discovery the individuals responsible for the representations made. (Pls.' Supp. Br. 7.) The problem with Plaintiffs' argument is that the facts upon which their fraud claim is based should already be known to Plaintiffs. They should be able to identify with some particularity, for example, what written materials contained misrepresentations, as Plaintiffs allege that they relied on the representations contained therein and they therefore have knowledge of what written documents they reviewed in deciding to acquire the machine over other printers. For the same reason, Plaintiffs should be able to identify with specificity the dates and places on which they received such written materials. Moreover, because Plaintiffs allege that oral representations were made by both defendants directly to Plaintiff RMP, Plaintiff RMP should be able to identify with whom it spoke and the dates on which such representations were made.

Moreover, Plaintiffs do not provide details concerning the “who, what, when, where, and how” or otherwise provide factual detail. The only time frame asserted in the amended complaint is that Plaintiff RMP entered into a lease agreement for the machine in or about May of 2011. (Am. Compl. ¶ 8.) Plaintiffs then state that “prior to and contemporaneous with the acquisition of the machine,” certain misrepresentations were made, yet there is no further delineation of when such statements were made. (Id. ¶ 58.) Plaintiffs have not indicated the specific portion of any document that they claim constitutes a misrepresentation, nor have they quoted from any of the written materials so as to put Defendants on notice of which documents purportedly contain misrepresentations. The Court also notes Plaintiffs' failure to allege in the amended complaint that Defendants knew that the representations contained in their written materials or verbal communications were false, a required element for a fraud claim under New Jersey law. Based on these pleading failures, Count IX will be dismissed without prejudice.

E. Count X—Negligent Misrepresentation

In Count X, Plaintiffs assert a claim for negligent misrepresentation, averring therein that Defendants made various misrepresentations regarding the quality of the machine and its parts and components and that such misrepresentations were made to induce reliance by Plaintiff RMP. (Am. Compl. ¶ ¶ 70–73.) Plaintiffs contend that they would not have acquired the machine but for the alleged misrepresentations but instead would have “attempted to place in operation another machine or equipment of similar type or effect.” (Id. ¶ 74.) Defendants argue that Plaintiffs failed to plead this claim with the requisite specificity under Rule 9(b) of the Federal Rules of Civil Procedure. (Def. 3D Systems' Br. 17–19; Def. Innovated Solutions' Br. 17–20.) Defendants also argue that this claim is barred by New Jersey's economic loss doctrine. (Def. 3D Systems' Br. 28–32; Def. Innovated Solutions' Br. 28–32.)

1. Choice of Law

The statute of limitations for a negligent misrepresentation claim in Pennsylvania is two years. 42 Pa.C.S.A. § 5524(7) ; Albarqawi v. 7–Eleven, Civil Action No. 12–3506, 2014 WL 616975, at *4 (E.D.Pa. Feb. 18, 2014). New Jersey applies a six-year statute of limitations to negligent misrepresentation claims. N.J. Stat. Ann. § 2A:14–1 ; Kronfeld v. First Jersey Nat'l Bank, 638 F.Supp. 1454, 1478 (D.N.J.1986). South Carolina's statute of limitations for a negligent misrepresentation claim is three years. S.C.Code § 15–3–530(5) ; Graham v. Welch, Roberts and Amburn, LLP, 404 S.C. 235, 239, 743 S.E.2d 860 (S.C.Ct.App.2013).

As with the fraud claim, the choice of law analysis for Plaintiffs' negligent misrepresentation claim demonstrates that there is an actual conflict between the laws of New Jersey, Pennsylvania, and South Carolina. Each state applies a different statute of limitations, and Plaintiffs' claim would be time-barred under the Pennsylvania statute. The Court therefore turns to the factors set forth the Restatement (Second) of Conflict of Laws for claims of negligent misrepresentation, which are set forth in Section 148. The Court already analyzed these factors in connection with the common law fraud claim, supra, and concluded that it will apply the law of Plaintiffs' home state, New Jersey. Thus, New Jersey law will also apply to Plaintiffs' negligent misrepresentation claim.

2. Analysis

Under New Jersey law, to plead a claim of negligent misrepresentation, a plaintiff must allege “ ‘[a]n incorrect statement, negligently made and justifiably relied upon’ ” and economic loss sustained as a consequence of that reliance. Green v. Morgan Props., 215 N.J. 431, 457, 73 A.3d 478 (2013) (quoting H. Rosenblum, Inc. v. Adler, 93 N.J. 324, 334, 461 A.2d 138 (1983), superseded on other grounds, N.J. Stat. Ann. § 2A:53A–25 ).

Initially, the Court notes that there is disagreement among the courts in this District regarding the pleading standard that applies to claims of negligent misrepresentation. Some courts have required plaintiffs to plead negligent misrepresentation in accordance with Federal Rule of Civil Procedure 9(b). See, e.g., In re Schering–Plough Corp. Intron/Temodar Consumer Class Action, 2:06–cv–5774, 2009 WL 2043604, at *33 (D.N.J. July 10, 2009), Gray v. Bayer Corp., Civ. A. No. 08–4716, 2009 WL 1617930, at *3 (D.N.J. June 9, 2009). Other courts have declined to apply Rule 9(b) to negligent misrepresentation claims. See, e.g., Rawson Food Servs., Inc. v. TD Bank, N.A., Civ. A. No. 13–3084, 2014 WL 809210, at *5 (D.N.J. Feb. 28, 2014) ; Donachy v. Intrawest U.S. Holdings, Inc., Civ. A. No. 104038, 2012 WL 869007, at *5 (D.N.J. Mar. 14, 2012) ; Kirtley v. Wadekar, Civ. A. No. 05–5383, 2006 WL 2482939, at *2 (D.N.J. Aug. 25, 2006).

The Court need not resolve this issue, however, because the Court finds that Plaintiffs' negligent misrepresentation claim is barred by the economic loss doctrine, which generally limits recovery for defective goods to remedies provided by the U.C.C. Defendants raise the economic loss doctrine in their moving briefs, yet Plaintiffs fail to address the argument or demonstrate that their claims are not barred by this doctrine.

In Spring Motors Distributors, Inc. v. Ford Motor Co., 98 N.J. 555, 489 A.2d 660 (1985), the New Jersey Supreme Court held that “a commercial buyer seeking damages for economic loss resulting from the purchase of defective goods may recover from an immediate seller and a remote supplier in a distributive chain for breach of warranty under the U.C.C., but not in strict liability or negligence.” Id. at 561, 489 A.2d 660. The Court premised this conclusion on the distinction between tort law and contract law, noting that “the purpose of a tort duty of care is to protect society's interest in freedom from harm, i.e., the duty arises from policy considerations formed without reference to any agreement between the parties[,]” whereas “a contractual duty ... arises from society's interest in the performance of promises.”Id. at 579, 489 A.2d 660. The Court concluded that “[a]s among commercial parties in a direct chain of distribution, contract law, expressed here through the U.C.C., provides the more appropriate system for adjudicating disputes arising from frustrated economic expectations.” Id. at 580, 489 A.2d 660.

Subsequent to Spring Motors, the New Jersey Supreme Court extended the economic loss doctrine to consumer purchasers as well as commercial purchasers. Alloway v. Gen. Marine Indus., L.P., 149 N.J. 620, 695 A.2d 264 (1997). In Alloway, the Court stated that “a tort cause of action for economic loss duplicating the one provided by the U.C.C. is superfluous and counterproductive.” Id. at 641, 695 A.2d 264. The Court explained that the fundamental distinction between permissible and impermissible claims lies in the object of the damage: “[g]enerally speaking, tort principles are better suited to resolve claims for personal injuries or damage to other property” while “[c]ontract principles more readily respond to claims for economic loss caused by damage to the product itself.” See id. at 627, 695 A.2d 264. The Court also noted that “[t]he U.C.C. represents the Legislature's attempt to strike the proper balance in the allocation of the risk of loss between manufacturers and purchasers for economic loss arising from injury to a defective product.” Id. at 629, 695 A.2d 264.

Thus, in New Jersey, the U.C.C. provides “the exclusive remedy for claims of purely economic loss due to a defective product.” Goldson v. Carver Boat Corp., 309 N.J.Super. 384, 395, 707 A.2d 193 (N.J.Super.Ct.App.Div.1998) ( “where the ‘harm suffered is to the product itself, unaccompanied by personal injury or property damage ... principles of contract, rather than of tort law, [are] better suited to resolve the purchaser's claim.’ ”). Where “there is no substantial disparity in bargaining power, and the only damage caused by the defective product is to the product itself, contract law, and the law of warranty in particular, is best suited to set the metes and bounds of appropriate remedies.” Goldson, 309 N.J.Super. at 397, 707 A.2d 193.

In this case, Plaintiffs seek damages solely relating to the alleged malfunction of the machine; they do not seek damages for injury to a person or other property. In this regard, Plaintiffs allege that they suffered damage in the form of “repeated delays and lost production time, costly replacement, and a repeated inability to meet delivery schedules and an attendant loss of customers.” (Am. Compl. ¶ 14.) Additionally, the Court notes that the allegations of the amended complaint demonstrate the parties had equal bargaining power. Plaintiffs aver, for example, that had they known the machine would not operate as had been represented to them, they would never have acquired the machine, would not have incurred any of the expenses connected with its acquisition, and would have attempted to place in operation another machine or equipment of similar type or effect. (Id. ¶ 62.)

Because Plaintiffs seeks to recover in tort for an allegedly defective product and their economic consequences, not for damage to persons or to other property, the Court finds that Plaintiffs' negligent misrepresentation claim is barred by New Jersey's economic loss doctrine. This claim will be dismissed with prejudice.

F. Count XI—New Jersey Consumer Fraud Act

Plaintiffs assert in Count XI a claim for a violation of the New Jersey Consumer Fraud Act, N.J. Stat. Ann. § 56:8–1 et seq. (hereafter, “NJCFA”). This claim is based on the same alleged misrepresentations discussed previously in connection with Plaintiffs' common law fraud claim. (See Am. Compl. ¶¶ 8081.)

1. Choice of Law

The NJCFA is one of the strongest in the country and “may ‘actually conflict’ with those of other states for a panoply of reasons, including the fact that it ‘encourages private class actions for consumer fraud’ while other statutes forbid them; it allows actions related to commercial purposes while other statutes limit actions to ‘personal, family or household purposes'; and it allows for treble damages, which other statutes do not.” Skeen v. BMW of N. Am., LLC, Civ. No. 2:13–cv–1531, 2014 WL 283628, at *5 (D.N.J. Jan. 24, 2014) (quoting Int'l Union of Oper. Eng'rs Local # 68 Welfare Fund v. Merck & Co., Inc., 384 N.J.Super. 275, 294–95, 894 A.2d 1136 (N.J.Super.Ct.App.Div.2006) ).

The NJCFA and the Pennsylvania Unfair Trade Practices and Consumer Protection Law (hereafter, “UTPCPL”) are in direct conflict. Pennsylvania's consumer protection statute requires a plaintiff to prove reliance under its consumer protection statutes, whereas the NJCFA does not place such a stringent burden on a plaintiff. The NJCFA requires only proof of a causal nexus between the concealment of the material fact and the loss, and a plaintiff need not demonstrate that he relied on the misrepresentation to state a claim under the NJCFA. Marcus v. BMW of N. Am., LLC, 687 F.3d 583, 606 (3d Cir.2012) ; Weinberg v. Sun Co., Inc., 565 Pa. 612, 618, 777 A.2d 442 (Pa.2001) (UTPCPL did not “do away with the traditional common law elements of reliance and causation.”).

The NJCFA is also in conflict with South Carolina's Uniform Trade Practices Act (hereafter, “UTPA”). The South Carolina statute requires a plaintiff to prove that the defendant's actions adversely affected the public interest by, for example, showing that the defendant's acts or practices have the potential for repetition. Wright v. Craft, 372 S.C. 1, 29, 640 S.E.2d 486 (S.C.App.2006). The NJCFA, by contrast, has no public interest impact component. Spera v. Samsung Elec. Am., Inc., Civ. A. No. 2:12–cv–05412, 2014 WL 1334256, at *4 (D.N.J. Apr. 2, 2014).

Since there are actual conflicts between the NJCFA and both the UTPA and the UTPCPL, the Court must proceed to the second prong of the most significant relationship test. The Court considers the factors set forth in Section 148 of the Restatement (Second) of Conflict of Laws for consumer fraud claims. The Court already analyzed these factors in connection with the common law fraud claim and concluded that they weigh in favor of application of Plaintiffs' home state, New Jersey. Therefore, the Court will apply New Jersey law to Plaintiffs' statutory consumer fraud claim.

2. Analysis

The NJCFA provides a cause of action to “[a]ny person who suffers any ascertainable loss of moneys or property, real or personal, as a result of the use or employment by another person of any method, act, or practice declared unlawful under this act ... [.]” N.J. Stat. Ann. § 56:8–19. To state a cause of action under the NJCFA, a plaintiff must allege: “(1) an unlawful practice by the defendants; (2) an ascertainable loss by plaintiff; and (3) a causal nexus between the first two elements—defendants' allegedly unlawful behavior and the plaintiff's ascertainable loss.” Parker v. Howmedica Osteonics Corp., No. 07–2400, 2008 WL 141628, *2 (D.N.J. Jan. 14, 2008) (citation omitted). An “unlawful practice” may be an affirmative act, a knowing omission, or a regulatory violation.See id.

Plaintiffs asserting claims under the NJCFA must meet the heightened pleading standard of Federal Rule of Civil Procedure 9(b). Frederico, 507 F.3d 188, 200 (3d Cir.2007). Defendants argue that Plaintiffs' NJCFA claim is devoid of factual support for the same reasons discussed above in connection with the fraud claim. The Court agrees. As Plaintiffs' NJCFA claim merely incorporates the prior paragraphs of the amended complaint, the same allegations apply to both their fraud claim and their NJCFA claim. Plaintiffs have not supplemented their NJCFA claim with additional facts that warrant separate analysis. For the same reasons that Plaintiffs' fraud claim lacks sufficient specificity under Rule 9(b), the NJCFA claim similarly fails to meet the heightened pleading requirement.

Count XI of the amended complaint will be dismissed without prejudice.

G. Count I—Breach of Contract

Although the claims against Defendants 3D Systems and Innovated Solutions are largely duplicative, the amended complaint contains a count for breach of contract against only Defendant Innovated Solutions. In moving to dismiss this count, Innovated Solutions argues that this count is based on the Warranty and should be dismissed for the same reasons that the express warranty claim should be dismissed. (Def. Innovated Solutions' Br. 12.)

The Court finds that Plaintiffs' breach of contract claim is not based on an express warranty, but on an alleged sales contract between Plaintiff RMP and Innovated Solutions. In the amended complaint, Plaintiffs aver that the lease agreement through Bancorp “was, in reality, a sales contract pursuant to which defendant Innovated agreed to transfer the machine from defendant Innovated to plaintiff RMP.” (Am. Compl. ¶ 8.) Plaintiffs further allege that “defendant Innovated was aware from its conversation with plaintiffs RMP and Joseph Pizzo that RMP intended to use the machine to perform certain specific tasks which were absolutely critical to RMP in the conduct of its business, and that a properly functioning machine was an essential component of the operation of said business[.]” (Id. ¶ 10.) Plaintiffs then allege that “Defendant Innovat[ed] breached its contract with plaintiffs by, among other things, delivering a non-conforming and defective product[.]” (Id. ¶ 18.)

These allegations demonstrate that Plaintiffs' breach of contract claim is based on a separate agreement with Defendant Innovated Solutions, and is not based on a written warranty. Because Innovated Solutions does not address why the contract claim is subject to dismissal pursuant to Rule 12(b)(6), other than the arguments raised in connection with the express warranty claim, Defendant Innovated Solutions' motion is denied without prejudice.

V. CONCLUSION

For the foregoing reasons, the Court finds that Plaintiffs' amended complaint fails to meet the pleading requirements under Federal Rule of Civil Procedure 12(b)(6) and, to the extent Plaintiffs assert claims for common law fraud and violations of the New Jersey Consumer Fraud Act, Federal Rule of Civil Procedure 9(b). Accordingly, the claims in Counts II through VIII, IX and XI are dismissed, without prejudice to Plaintiffs' right to file an amended pleading as to these claims. Additionally, the claim in Count X for negligent misrepresentation is dismissed, with prejudice, pursuant to the economic loss doctrine. The claim for breach of contract in Count I is not dismissed, but Defendant Innovated Solutions may raise its arguments in connection with this claim in any amended complaint that Plaintiffs may file.

An Order consistent with this Opinion will be entered on this date.