MEMORANDUM AND ORDER

CARDONA, P.J.

This litigation arises out of injuries sustained by plaintiff, a technician, at his workplace. Plaintiff's duties included periodic inspections of an industrial device called a crystallizer which was purchased by his employer (hereinafter Keyano) from defendant Eco-Tec, Inc. The crystallizer consists of a large tank used in a chemical process whereby a liquid solution of aluminum is dissolved in sodium hydroxide and the aluminum is separated out in crystal form. The crystallizer contains a mechanical mixer which keeps the solution flowing. Whenever the machine is started up (before there is enough liquid in the tank to operate the mixer), long, hollow, metal "air pipes" attached to air hoses and compressors are used to agitate the liquid to prevent it from solidifying. At the time of installation, defendant Walgren Company, pursuant to specifications provided by Eco-Tec, manufactured two air pipes that were permanently attached to air compressors to be used for that purpose. Furthermore, as a separate part of the regular operation of the crystallizer, the inside walls of the tank are periodically inspected for buildups of solid aluminum by inserting long metal rods or pipes into manholes at the top of the tank and tapping the inside surface, listening for the proper sound. The original installation instructions for the crystallizer set forth that "probe bars," described as long, solid metal pipes, be used for that inspection. However, probe bars were not provided and, instead, at the time of the accident, Keyano's employees used four hollow air pipes. The air pipes were left at all times in the tank and used to check for buildups in a manner similar to a probe bar.

On the day of the accident, plaintiff climbed up to the top of the tank and used the hollow air pipes to check for buildups. Unfortunately, after putting down the fourth air pipe, the caustic fluid in the crystallizer tank spurted out of the open end of the hollow pipe and sprayed his face and other parts of his body. Plaintiff commenced this action against defendants alleging causes of action in negligence, strict products liability and breach of warranty. Following joinder of issue, defendants moved for summary judgment and Supreme Court dismissed the warranty cause of action as time barred, but declined to dismiss the remaining claims, prompting this appeal.

Initially, defendants contend that Supreme Court erred in failing to grant their summary judgment motions as to the design and manufacturing claims based upon plaintiff's failure to establish that an air pipe manufactured and supplied by them caused plaintiff's injuries. Notably, a defendant who seeks summary judgment claiming that it did not manufacture the allegedly defective product has the initial burden of establishing that, as a matter of law, it did not manufacture the product in question; the plaintiff must then rebut this showing with affirmative evidence sufficient to create a reasonable inference that the defendant's product caused the injury (see Clark v. Globe Bus. Furniture, 237 A.D.2d 846, 847;Antonucci v. Emeco Indus., 223 A.D.2d 913, 914; see also Scheidel v. A.C. S., Inc., 258 A.D.2d 751, 754, lv denied 93 N.Y.2d 809).

Here, defendants point out that while the air pipes originally manufactured by Walgren and supplied by Eco-Tec had 90-degree elbow bends at the end protruding from the top of the tank and the pipes were permanently attached to an air hose by brass fittings, it is clear from plaintiff's testimony that there were four air pipes in use at the time of the accident without any elbow bends or couplings similar to those manufactured by Walgren nor were they permanently attached to air hoses. Notably, plaintiff has offered no theory upon which he could prove that the air pipe that caused his injury was provided by Walgren rather than one made by some other entity. Thus, it cannot be said that plaintiff established that it is "reasonably probable," as opposed to merely possible, that defendants were the source of the "offending product" (Healey v. Firestone Tire Rubber Co., 87 N.Y.2d 596, 601-602; see Moffett v. Harrison Burrows Bridge Contrs., 266 A.D.2d 652, 654). Moreover, even if it is assumed that Walgren manufactured some of the air pipes, plaintiff cannot rely on the theory of alternative liability to prevail due to the fact that plaintiff has not identified the alternative manufacturer/supplier of the air pipes and, thus, cannot show that all potential tortfeasors are present in the case (see New York Tel. Co. v. AAER Sprayed Insulations, 250 A.D.2d 49, 52-53; cf. Raymond v. Di Stefano, 222 A.D.2d 810, 811). Accordingly, Supreme Court should have dismissed all claims against defendants alleging design or manufacturing defects related to the air pipe.

Turning to the remaining claims alleging failure to warn, we find that summary judgment was properly denied to Eco-Tec on this cause of action. The record establishes that Eco-Tec was the supplier of the entire crystallizer system and provided training to Keyano employees as to its proper use. The record shows that Eco-Tec knew that hollow air pipes should not be used to probe for tank buildup and should be removed once the mixer was operating. Furthermore, Eco-Tec was aware that no solid probe bars were provided to Keyano, yet did not provide any warnings against the use of hollow air pipes as probe bars. As demonstrated by the proof, the air pipes originally supplied by Eco-Tec were the right length to use as probe bars and inserted into the same openings in the crystallizer as the probe bars. They were made of a proper material for use as probe bars and were the only items provided to the customer which resembled the probe bars illustrated in the installation manual for the crystallizer. Thus, regardless of whether Eco-Tec manufactured or supplied the actual air pipe involved in the accident, a question of fact remains as to whether the alleged modification or misuse of air pipes as probe bars when using the crystallizer system was foreseeable giving rise to a duty to warn of potential dangers associated therewith (see Liriano v. Hobart Corp., 92 N.Y.2d 232, 240; McArdle v. Navistar Intl. Corp., 293 A.D.2d 931, 933; Holloway v. Willette Corp. of N.J., 280 A.D.2d 876, 877; cf. Tortoriello v. Bally Case, 200 A.D.2d 475, 477).

The remaining arguments raised by the parties have been examined and found to be unpersuasive.

Mercure, Peters, Spain and Carpinello, JJ., concur.

ORDERED that the order is modified, on the law, without costs, by reversing so much thereof as partially denied defendant Walgren Company's motion for summary judgment and as denied that part of defendant Eco-Tec, Inc.'s motion for summary judgment seeking dismissal of the design and/or manufacturing defect causes of action; motions granted to the extent of dismissing the failure to warn cause of action against Walgren and dismissing the design and/or manufacturing causes of action against both defendants; and, as so modified, affirmed.