Litwiller Machine & Manufacturing, Inc. v. NBD Alpena Bank

Full title: LITWILLER MACHINE MANUFACTURING, INC v NBD ALPENA BANK

Court: Michigan Court of Appeals

Date published: Jun 19, 1990

184 Mich. App. 369 (Mich. Ct. App. 1990)

457 N.W.2d 163

Opinion

Docket No. 118425.

Decided June 19, 1990.

Carl C. Silver, for plaintiff.

William S. Smigelski, for defendant.

Before: REILLY, P.J., and MacKENZIE and SULLIVAN, JJ.

PER CURIAM.

Plaintiff appeals as of right from an order denying its motion for summary disposition and granting defendant's motion for summary disposition pursuant to MCR 2.116(C)(10). We affirm.

Plaintiff is in the steel fabrication business. In 1984, it was awarded a government contract for the production of thirty-nine boom assemblies for the defense department. Earlier, another steel fabrication company, Koss Industries, had also been awarded a contract for the production of forty-six identical boom assemblies. Since Koss was already set up for the fabrication of the assemblies under its contract, plaintiff contacted Koss to arrange for Koss' fabrication of the assemblies plaintiff had contracted to produce.

Plaintiff and Koss entered into an agreement whereby plaintiff would purchase the preformed steel components needed for the thirty-nine assemblies it was to produce. The components for plaintiff's contract would be shipped by the supplier directly to Koss. Koss would then fabricate all the boom assemblies for both contracts (a process involving lathing, milling, the addition of certain other components, welding, and painting), after which plaintiff would have the thirty-nine completed assemblies shipped to the government. Although the agreement was never reduced to writing, it appears from the affidavits of plaintiff's vice president that plaintiff would pay Koss for its fabrication services out of the proceeds of plaintiff's government contract, "less the favorable price differential obtained by . . . Plaintiff for Koss on [the] components shipped to Koss." Consistent with the agreement, plaintiff purchased the steel components and they were delivered to Koss. The components were not earmarked as plaintiff's upon their delivery to Koss in early 1985, although Koss and plaintiff understood that plaintiff owned components for thirty-nine of the eighty-five assemblies in Koss' possession.

Before Koss completed fabrication of the assemblies, it went into default on an earlier loan from defendant bank. The loan had been secured by security agreements granting defendant a security interest in "all [Koss'] inventory, raw materials, work in process and supplies now owned or hereafter acquired." It is undisputed that the bank's security interest was perfected prior to 1984.

The components for plaintiff's government contract remained at Koss' machine shop. In October, 1985, plaintiff informed defendant that plaintiff owned the components. The following month, defendant took possession of Koss' assets, including the components for the thirty-nine boom assemblies. Defendant subsequently sold the components at public sale. This action, alleging that defendant converted plaintiff's property, followed.

Plaintiff's contention is that the components were owned by plaintiff rather than Koss, so that defendant's security interest in Koss' after-acquired inventory could not attach to them. Defendant, on the other hand, contends that Koss had sufficient rights in the components to support defendant's claimed security interest. Like the trial court, we agree with defendant.

This case is governed by the provisions of Article 9 of the Uniform Commercial Code, MCL 440.9101 et seq.; MSA 19.9101 et seq. In order for the security interest granted by Koss to defendant to include the subject thirty-nine boom assembly components, the security interest must have attached to the goods. A security interest attaches to collateral when (1) the debtor (Koss) has signed a security agreement describing the collateral, (2) value has been given, and (3) the debtor has "rights in the collateral." MCL 440.9204(1); MSA 19.9204(1). The second requirement is not disputed in this case; the question is whether the components were part of Koss' after-acquired inventory described in its security agreement with defendant, and, if so, whether Koss had sufficient rights in the boom assembly components to meet the third requirement.

The question whether components which have been supplied to a manufacturer for fabrication constitute inventory of the manufacturer was addressed in Morton Booth Co v Tiara Furniture, Inc, 564 P.2d 210 (Okla, 1977). The facts in Booth are similar to those of this case. Tiara and Booth had a contract whereby Booth supplied to Tiara most of the components for the manufacture of gun cabinets. Tiara supplied additional lumber and built the cabinets for Booth. Booth then paid Tiara for the finished product. When Tiara defaulted on certain bank loans secured by its after-acquired inventory, the banks attempted to enforce their security interests by taking possession of Tiara's inventory, including the components supplied by Booth. The Booth court concluded that the components were part of Tiara's inventory:

Booth argues that both the security agreement and the financing statement executed by Tiara in favor of [the] Banks describes the collateral as "inventory" and the raw materials "furnished" by Booth were never a part of Tiara's assets or inventory. Booth speaks of inventory in its accounting sense as if it were synonymous with "inventory" as a term of art when used in the Code. This is not necessarily the case. The Code defines "inventory" as being goods "held by a person who holds them for sale or lease or to be furnished under contracts of service or if he has so furnished them, or if they are raw materials, work in process or materials used or consumed in a business." 12A O.S. 1971, § 9-109[12A-9-109](4). The goods in question were definitely "raw materials, work in process or materials used" in Tiara's business. Whether the raw materials supplied by Booth ever appeared on Tiara's books as "assets" or "inventory" for any purpose has no bearing on whether they are inventory for the purposes of the Code. [564 P.2d 213.]

The definition of "inventory" under the Michigan UCC is identical to the definition applied in Booth. See MCL 440.9109(4); MSA 19.9109(4). Applying Booth to this case, we conclude that plaintiff's components were a part of Koss' inventory, and thus were described in the security agreement between Koss and defendant. The first requirement for defendant's security interest to attach to the components is satisfied.

We next consider the third requirement for attachment of defendant's security interest to the components, that the debtor (Koss) must have sufficient "rights in the collateral." Plaintiff contends that Koss was a mere bailee of plaintiff's components. Defendant contends that Koss had a greater interest in them.

The phrase "rights in the collateral" is not defined in the UCC. The UCC, however, does not require that a debtor have full ownership rights. See, e.g., MCL 440.9112; MSA 19.9112. Indeed, title to goods is of little relative consequence under the UCC. Booth, supra, 564 P.2d 212. A deliberate effort was made by the drafters of the UCC to avoid defining the rights of the parties to goods in terms of who has title. Id.

The Booth court described "rights in the collateral" as follows:

[M]ere possession of goods is not enough under the Code to demonstrate that the debtor had "rights" in the collateral. . . . The provisions of Article 9 were never intended to give rise to a security interest where the debtor was, for example, a mere gratuitous bailee. The cases generally hold, however, that where a debtor gains possession of collateral pursuant to an agreement endowing him with any interest other than naked possession, the debtor has acquired such rights as would allow the security interest to attach. [564 P.2d 214.]

In Booth, the court concluded that Tiara had rights in the materials supplied by Booth beyond mere possession: it had the right to incorporate the materials into a product for sale, to use the materials, and to sell the finished product to Booth. This was sufficient to allow the banks' security interest to attach.

In State Bank of Young America v Vidmar Iron Works, Inc, 292 N.W.2d 244 (Minn, 1980), Vidmar, a metal shop, contracted to have another company, Adaptable Industries, Inc., do its overflow work. The contracts involved paying Adaptable to do fabricating work on raw materials supplied by Vidmar. Adaptable defaulted on a bank loan secured in part by its after-acquired inventory, and the bank sought to enforce its security interest against the materials supplied by Vidmar. The Vidmar court stated:

This court has never considered whether the rights of one in Adaptable's position are sufficient to allow a security interest to attach. However, in James Talcott, Inc v Franklin National Bank, 292 Minn. 277; 194 N.W.2d 775 (1972), this court held that a security interest could attach to property purportedly leased by the debtor. Looking to the substance of the transaction, the court held that ownership for Article 9 purposes was not dependent upon formal title. The court stated:

"[T]he draftsmen of the code intended that its provisions should not be circumvented by manipulation of the locus of title. For this reason, consignment sales, conditional sales, and other arrangements or devices whereby title is retained in the seller for a period following possession by the debtor are all treated under Art. 9 as though title had been transferred to the debtor and the creditor-seller had retained only a security interest in the goods." 292 Minn at 285; 194 N.W.2d at 781. [292 N.W.2d 250.]

The Vidmar court concluded that Adaptable had sufficient rights in the material supplied by Vidmar to allow the bank's security interest to attach. Adaptable had contract rights in the goods to the extent of the amount due for its work and had a statutory mechanic's lien in the goods to secure it.

Another case factually similar to this case is Kinetics Technology International Corp v Fourth National Bank of Tulsa, 705 F.2d 396 (CA 10, 1983). There, Kinetics (KTI), a furnace manufacturer, entered into a contract with OHT under which OHT was to build furnace economizers in part from materials supplied by KTI. Before the contract was completed, OHT shut down and surrendered possession of the materials supplied by KTI to a bank which had a security interest in OHT'S after-acquired inventory. The Kinetics court applied Booth's holding that a debtor has rights in the collateral when it has "any interest other than naked possession," and concluded that the bank's security interest attached to KTI'S goods. The Kinetics court observed:

The Morton Booth definition strongly supports the Article Nine purpose of promoting certainty in commercial loan transactions. See UCC, § 9-101, Official Comment. Otherwise, if a debtor received collateral from a third party under an agreement giving the debtor authority to exercise any outward indicia or manifestations of ownership or control, a would-be creditor could easily be misled into making a loan under an ineffective security agreement. For example, in Morton Booth, . . . [h]ad the court found that Tiara lacked sufficient "rights" in the Morton Booth-supplied collateral for the banks' security interest to attach, the banks' claim to the goods upon Tiara's default would have been defeated by the sort of hidden-title subterfuge the Code was intended to prevent.

This reason for the Morton Booth result is supported by another feature of Article Nine. In this context, buyers such as Morton Booth and KTI finance a debtor's operation by supplying materials rather than money with which to buy materials. Such a buyer-lender could easily protect itself from after-acquired property creditors of its contractor by filing an Article Nine purchase money security interest in the goods supplied by it to the contractor, as well as those purchased or otherwise identified in the contract by the contractor. See tit. 12A, §§ 9-107, -312(3). Requiring buyers such as KTI to take this additional step — done easily and at minimal cost — thoroughly advances the Code policy of providing notice and certainty to inventory lenders. [705 F.2d 399-400.]

In this case, we conclude that Koss had sufficient rights in the components supplied by plaintiff so that defendant's security interest attached to those components. As in Vidmar, Koss had contract rights to the goods to the extent of the amount due for its work and could impose a lien on the goods to enforce that right. See MCL 570.186; MSA 26.402; Nickell v Lambrecht, 29 Mich. App. 191; 185 N.W.2d 155 (1970). As in Booth, Koss had the right to use and incorporate the components for what must be characterized as a sale of the completed assemblies to plaintiff. This amounts to more than "naked possession" of the components.

On the basis of the above, we conclude that defendant's security interest in Koss' after-acquired inventory attached to plaintiff's components. The parties do not dispute that the security interest was perfected prior to 1984. As pointed out in Kinetics, supra, a supplier of components such as plaintiff has a purchase money security interest in the components. Kinetics, supra, 705 F.2d 399. See also Vidmar, supra; Booth, supra. In this case, plaintiff took no steps to perfect its security interest. Under MCL 440.9312; MSA 19.9312, therefore, defendant's perfected security interest in the components had priority over plaintiff's unperfected security interest. The trial court properly granted summary disposition in favor of defendant.

Affirmed.