Opinion
No. 88-1012
Submitted January 18, 1989 —
Decided April 12, 1989.
Taxation — Sales tax — Sawmill — High lifts, crane and related fuel and parts used to unload, sort, stack and convey logs prior to debarking process not exempt.
APPEAL from the Board of Tax Appeals, No. 86-C-939.
William S. DeNoon, appellee, operates a sawmill in which he manufactures lumber from purchased logs. The purchased logs are transported to DeNoon's sawmill by truck and unloaded with a high lift. The logs are graded and scaled, and priced according to size and type of wood. The logs are then taken to their species pile with the high lift. In summer, when DeNoon's operation requires more space in the log yard, the logs are double stacked with a Barko crane.
Selected logs are removed from the stacks and carried to the debarking machine with the high lift. The debarking machine removes the bark, mud, stones, and other debris from the log, and sawmill machinery carries the log to a circular saw where the log is sawed into planks. An edger machine then cuts the plank so that it will be square. Thereafter, DeNoon's inspectors determine the plank's grade and mark its length with chalk or lumber crayon. Ninety-five percent of DeNoon's chalk and lumber crayon is used for this marking.
The planks then travel to the double-end trimmer where they are cut to the marked length. The cut lumber is stacked manually upon lumber carts and taken to the air-drying area. High lifts unload the lumber from the cart and the logs are stacked for air drying. After air drying, the lumber is ready for sale. When sold, the high lifts carry the lumber to the loading area, where it is placed on outgoing trucks.
The Tax Commissioner, appellant, assessed sales and use taxes on the high lifts, the Barko crane, the lumber carts, fuel, spare parts, and the chalk and lumber crayon purchased during the audit period of January 1980 through December 1982. On appeal, the Board of Tax Appeals ("BTA") found that the sorting of the logs was essential to DeNoon's manufacturing and was, therefore, the beginning of manufacturing, and that air drying of the cut planks was the last stage of manufacturing. The BTA excepted the contested items from taxation, finding that they were used directly in manufacturing.
The cause is now before this court upon an appeal as of right.
Burke Rawlings Co., L.P.A., and James F. Burke, Jr., for appellee.
Anthony J. Celebrezze, Jr., attorney general, and Floyd J. Miller, Jr., for appellant.
R.C. 5739.01(E)(2) excepts from Ohio sales tax items purchased by a taxpayer that are used or consumed directly in the production of tangible personal property for sale by manufacturing or processing. During the relevant audit period, "manufacturing" was defined in R.C. 5739.01(R) (also numbered [S]), in pertinent part, as:
We will only discuss sales tax exceptions because R.C. 5741.02(C)(2) renders sales tax exceptions applicable to the use tax.
"* * * the transformation or conversion of material or things into a different state or form from that in which they originally existed * * *."
In Youngstown Bldg. Material Fuel Co. v. Bowers (1958), 167 Ohio St. 363, 5 O.O. 2d 3, 149 N.E.2d 1, syllabus, this court stated the test to determine whether tangible personal property is used directly in manufacturing:
"* * * [T]he test is not whether such property is essential to the operation of an `integrated plant,' the test to be applied being, when does the actual manufacturing or processing activity begin and end, and is the property used or consumed during and in the manufacturing or processing period."
We recently stated the test in Southwestern Portland Cement Co. v. Limbach (1988), 35 Ohio St.3d 196, 198, 519 N.E.2d 831, 833-834:
"Thus, to find a manufacturing exception under R.C. 5739.01(E)(2), it must first be determined that manufacturing has occurred ( i.e., a transformation or conversion of material or things into a different state or form has taken place). Then, the beginning and end of the manufacturing must be delineated. Finally, it must be decided whether the item under examination was used or consumed directly in manufacturing ( i.e., during and in the manufacturing)."
The commissioner argues that the contested items were not used directly in DeNoon's manufacturing because they were used either before or after transformation or conversion occurred. She maintains that manufacturing began, under the test announced in Semac Industries v. Collins (1976), 48 Ohio St.2d 4, 2 O.O. 3d 2, 354 N.E.2d 922, at the debarking machine and ended when the lumber was finally cut at the double trimmer.
The BTA excepted the equipment because it concluded that this court liberally applied the manufacturing exception in Southwestern Portland Cement Co., supra. In that case this court excepted mining equipment used to blast limestone from a quarry. We held that manufacturing began at that point because the limestone, which became the final manufactured product, was first changed in state or form in the blasting operation. The court followed Standard Pressed Steel Co. v. Lindley (1980), 62 Ohio St.2d 268, 16 O.O. 3d 318, 405 N.E.2d 281. That case held that the equipment that operates on raw materials, which by design become integrated into the marketable product, is excepted from taxation. To the contrary, equipment that operates on raw materials that are consumed in manufacturing but do not become a part of the product is not excepted. Ohio Ferro-Alloys Corp. v. Kosydar (1973), 34 Ohio St.2d 113, 63 O.O. 2d 195, 296 N.E.2d 533. The Southwestern Portland Cement Co. case should not be interpreted to be a new application of the manufacturing exception by this court.
The BTA also cited Mead Corp. v. Glander (1950), 153 Ohio St. 539, 42 O.O. 24, 93 N.E.2d 19, which excepted a crane used to unload purchased wood pulp, stacking it according to type, and to carry selected pulp to the beater room. The court held that selecting and sorting these materials was a step in processing paper. Since the crane was used in this step, it was excepted.
The BTA's reliance on both cases is misplaced. In Southwestern Portland Cement Co., this court held that manufacturing began at the quarry because a change in raw material began there. In this case, no change occurred in the logs until the debarking process.
The particular holding of Mead Corp., supra, was implicitly overruled in Semac Industries v. Collins, supra, when we held that the manufacturing in a sawmill began at the debarker because that was where transformation or conversion of the raw material first occurred. The court affirmed the BTA's denial of exception for forklift equipment that carried the log to the debarker. According to the court, this was a preliminary and preparatory operation under Ohio Ferro-Alloys Corp. v. Kosydar, supra.
Thus, the BTA erred when it excepted from taxation appellee's high lifts, crane, and related fuel and parts, used to unload, sort, stack and convey logs prior to the debarking process.
The chalk and lumber crayons were properly excepted because they were primarily used during and in manufacturing by inspectors to grade and mark the length of the planks as they moved between the edger and the double-end trimmer. Therefore, these materials were used directly in manufacturing.
However, the BTA incorrectly determined that the manufacturing process did not end at the double-end trimmer machine, but continued in the air-drying phase. No machine was used to dry the wood that was stacked on the premises to be air dried. Thus, no machinery caused a change in the state or form of the product. The result would be different if a machine such as a kiln were used to dry the lumber. Assuming, arguendo, that a change in state or form occurred, DeNoon did not cause that change to occur with the carts, the high lifts, or any other equipment. See, also, Galena Shale, Tile Brick Co. v. Bowers (Feb. 15, 1963), BTA No. 49253, unreported, and Structural Stoneware, Inc. v. Kosydar (Aug. 10, 1973), BTA No. A-301, unreported.
Accordingly, that portion of the BTA decision excepting from taxation the chalk and lumber crayons is affirmed. The remainder of the decision is reversed.
Decision affirmed in part and reversed in part.
SWEENEY, DOUGLAS, H. BROWN and RESNICK, JJ., concur.
HOLMES and WRIGHT, JJ., dissent.
I concur in the judgment of the majority. Arguably, the chalk and lumber crayons should be excepted from tax because their use occurs while the manufacturing process is taking place. This point is not even contested in appellant's brief which contains no discussion or explanation as to why appellant Tax Commissioner thinks the chalk and crayons should be taxed.
With regard to the other items in question — the high lifts, the Barko crane, the lumber carts, fuel and spare parts — I strongly agree with the majority that these items should not be excepted from taxation as items used or consumed directly in the production of tangible personal property for sale by manufacturing or processing. I write separately only to express, once again, my concern for the piecemeal dismantling of the Tax Code.
It is understandable how the BTA came to the decision it rendered in this case. In attempting to follow the decision of a majority of this court in Southwestern Portland Cement Co. v. Limbach (1988), 35 Ohio St.3d 196, 519 N.E.2d 831, the BTA found all the items in question excepted from taxation. If the equipment used in the quarrying operation, reviewed in Southwestern Portland Cement Co., is excepted from taxation even though the business involved was the manufacture of cement and no change in state or form of the limestone took place until much later in the operation, then it is easy to see how the BTA, in applying the rule set down in Southwestern Portland Cement Co. to the facts of that case, could come to the decision it did in the case at bar.
Even though it requires us to reverse the BTA (which thought it was relying on and following a previous decision of this court), it is both comforting and commendable to see us returning to what appears to be a clear definition of "manufacturing" and "processing" as set forth in R.C. 5739.01(R). It is not difficult to see how any one of us, including the BTA, could go astray when cases such as Mead Corp. v. Glander (1950), 153 Ohio St. 539, 42 O.O. 24, 93 N.E.2d 19; Youngstown Bldg. Material Fuel Co. v. Bowers (1958), 167 Ohio St. 363, 5 O.O. 2d 3, 149 N.E.2d 1; Ohio Ferro-Alloys Corp. v. Kosydar (1973), 34 Ohio St.2d 113, 63 O.O. 2d 195, 296 N.E.2d 533; Gressel v. Kosydar (1973), 34 Ohio St.2d 206, 63 O.O. 2d 314, 297 N.E.2d 532; Interlake v. Kosydar (1975), 42 Ohio St.2d 457, 71 O.O. 2d 436, 330 N.E.2d 444; Semac Industries v. Collins (1976), 48 Ohio St.2d 4, 2 O.O. 3d 2, 354 N.E.2d 922; Standard Pressed Steel Co. v. Lindley (1980), 62 Ohio St.2d 268, 16 O.O. 3d 318, 405 N.E.2d 281; Southwestern Portland Cement Co. v. Lindley (1981), 67 Ohio St.2d 417, 21 O.O. 3d 261, 424 N.E.2d 304; OAMCO v. Lindley (1986), 27 Ohio St.3d 7, 27 OBR 427, 500 N.E.2d 1379; and Southwestern Portland Cement Co. v. Limbach (1988), supra, are attempted to be reconciled.
It is the mandate of this court that "`[s]tatutes relating to the exemption or exception from sales or use taxes are to be strictly construed.'" Philips Industries, Inc. v. Limbach (1988), 37 Ohio St.3d 100, 101, 524 N.E.2d 161, 161-162. See, also, Celina Mut. Ins. Co. v. Bowers (1965), 5 Ohio St.2d 12, 15, 34 O.O. 2d 7, 9, 213 N.E.2d 175, 178; General Mills, Inc. v. Limbach (1988), 35 Ohio St.3d 256, 258, 520 N.E.2d 218, 219. If we would just consistently follow this mandate, there would be less confusion (and fewer appeals) for taxpayers, the commissioner, the bar and the bench.
SWEENEY, J., concurs in the foregoing concurring opinion.
I totally agree with the Board of Tax Appeals' decision and would therefore affirm.
WRIGHT, J., concurs in the foregoing dissenting opinion.